|
Title: m3.8.3 cutting Post by: reneae86 on December 28, 2015, 06:22:01 AM Hi There
I have a golf 4 AUG on a M3.8.3 (06A906018R 10373558109 ) org 150 hk version and it is fitted with a K04 turbo problem are it is cutting around 4000 rpm like it is the rev limither (hard) so I was thinking are there a flow/load limither in the ECU and is there any one that ever have seen a Damos to the M3.8.3 or M5.9.2 Title: Re: m3.8.3 cutting Post by: overspeed on December 28, 2015, 07:15:25 AM Hi There I have a golf 4 AUG on a M3.8.3 (06A906018R 10373558109 ) org 150 hk version and it is fitted with a K04 turbo problem are it is cutting around 4000 rpm like it is the rev limither (hard) so I was thinking are there a flow/load limither in the ECU and is there any one that ever have seen a Damos to the M3.8.3 or M5.9.2 There is one MAF limiter and 2 load limiters. With K04 you need bigger injectors to achieve all the power it can make Title: Re: m3.8.3 cutting Post by: reneae86 on December 28, 2015, 08:15:34 AM hi
do you have addresses for the limiters ? and I know it need bigger injectores but just now want to see how it will run on standard to start with and get a idea on the program Title: Re: m3.8.3 cutting Post by: phil_84 on December 28, 2015, 02:40:31 PM Here is a map pack for this file
Hope this helps |