|
Title: Reflash Tuned File from 06A906032HA to 06A906032QJ ? Post by: chienliu1972 on August 29, 2011, 06:44:46 PM 2003 Sharan 1.8T AWC is fitted with "06A 906 032 HA" ECU. From ETKA, I find ECU "06A 906 032 QJ" may be fitted on Sharan 1.8T AWC engine, too. Could I relash the ABT tuned file from "HA" to "QJ" ECU? Due to these two ECUs could be both fitted on Sharan 1.8T AWC.
Title: Re: Reflash Tuned File from 06A906032HA to 06A906032QJ ? Post by: Tony@NefMoto on August 29, 2011, 09:09:07 PM The part numbers are similar enough that it may work. But if it doesn't work, you will likely have to recover the ECU by flashing in boot mode.
Title: Re: Reflash Tuned File from 06A906032HA to 06A906032QJ ? Post by: chienliu1972 on August 30, 2011, 11:26:23 PM I goolge the difference between "06A 906 032QJ" and "06A 906 032HA" in the below web site. http://autos.groups.yahoo.com/group/VAG-COM/message/20824 the actual coding of the module is 0004 ( by VAG COM) I checked this module in ETKA and it says that this ECM has two emissions programs inside PRG 0GG and PRG 7GG, the interesting part is that program 0GG if for EU4 compliance emissions ( Europe) and 7GG is for TIER1 compliance emissions (Mexico version of Sharan) I think that any of these programs is selectable by coding. before 2005 there was a special version of the module for the European Sharan (06A 906 032 QB)( emissions program 0GG) and mexican Sharan (06A 906 032 HA)(emissions program 7GG) but it appears that this 05 ECM the QJ version has both has both. In ELSA it doesnt gyve any info for coding it just refers you to the Guided fault finding function of VAS 5052 for coding, so I would like to know if it has some coding options available and what other Is it possible to change the difference emissions programs automatically in the flash, 29F800BB? How it works? |