|
Title: Need help with ecu coding that won't take. Post by: Vintagewhr on January 09, 2016, 02:58:37 PM So here is deal. I purchased an ecu(sometime ago). This is an L box that I was going to run in my b box 2000. So I go to install everything and find out the coding on the L box is 06611. I have everything done and it runs but I get the p1612 code and my transmission is like in dumb mode. I have tried multiple times to code my ecu to 06651 with zero success. Every time I try it just goes right back. I have tried the login. Seems to do nothing.... I am stumped. I need the experts and that's why I am here.... Any and all help is very much appreciated!!!
Title: Re: Need help with ecu coding that won't take. Post by: ddillenger on January 09, 2016, 03:28:20 PM The only reasons the coding wouldn't stick on an ME7.x ecu:
1. The engine is running. 2. The coding is not supported. Take a screenshot of the ecu number in vag-com, then go into nefmoto, and hit read ecu info. Screenshot that as well. Title: Re: Need help with ecu coding that won't take. Post by: Vintagewhr on January 09, 2016, 04:35:20 PM I can take a screenshot of the ecu in vcds. I am currently not running nefmoto. Was planning to start playing with it with this ecu. What do you mean by the coding is not supported? As in the number I am giving it doesn't exist??? Thanks for your help. Also below is the number on the ecu itself.
4B0 907 551 L Title: Re: Need help with ecu coding that won't take. Post by: ddillenger on January 09, 2016, 04:37:25 PM You are trying to put S4 coding in an A6 ecu.
4B0907551L supports the following coding variants: 06652 06752 The last digit is irrelevant to function, so you don't have to worry. Title: Re: Need help with ecu coding that won't take. Post by: Vintagewhr on January 09, 2016, 05:16:06 PM It is my understanding I can make an A6 ecu work right? If so which one of those would I want for a 2000 s4 tip?
I am on my way home and will be able to check the number in VCDS shortly. Thanks!!! Title: Re: Need help with ecu coding that won't take. Post by: Vintagewhr on January 09, 2016, 05:41:22 PM The vag number in vcds is 8DO 907 551 A
Title: Re: Need help with ecu coding that won't take. Post by: ddillenger on January 09, 2016, 06:14:25 PM Considering A is a manual ecu, it makes perfect sense that it won't accept tiptronic coding.
Flash it with a tiptronic file, then try your coding. Title: Re: Need help with ecu coding that won't take. Post by: Vintagewhr on January 09, 2016, 06:21:53 PM I don't have the ability to flash. So does this mean I am hosed unless I can flash it??
Title: Re: Need help with ecu coding that won't take. Post by: adam- on January 10, 2016, 05:18:17 AM I am currently not running nefmoto. Was planning to start playing with it with this ecu. I don't have the ability to flash. So does this mean I am hosed unless I can flash it?? I'm confused. Install Nef, flash a file. Done. Title: Re: Need help with ecu coding that won't take. Post by: Vintagewhr on January 10, 2016, 09:21:29 AM I can do that just haven't gotten that far yet. where would I get said tiptronic file. Or would I have to start flashing from my b box and start on a tune. I was hoping to put that tune on so I had a jumping off point that was tuned.
|