NefMoto

Noob Zone => Noob Questions => Topic started by: dokalanyi on January 14, 2016, 02:43:32 AM



Title: Passat B5 - APU, 4B0 906 018 BD finally reads, wrong layout (I think)
Post by: dokalanyi on January 14, 2016, 02:43:32 AM
Hey all,
I was finally able to get the correct cable, and read the ecu. While I was choosing the memory layouts, all the 400 layouts kept saying the memory layout couldn't be verified. So I read using 800BB layout, when I used Me7Check, there were a bunch of errors.

So I split the file using splits (windows command line tool), and the first part verifies correctly. I've attached the split file, in case any one can help me take a look.

Couldn't figure out how to attach more than one file

Kind regards,


Title: Re: Passat B5 - APU, 4B0 906 018 BD finally reads, wrong layout (I think)
Post by: TijnCU on January 19, 2016, 02:01:00 AM
This is a 400BB flash, but there is a problem with these ecu's that causes it to only read in 800BB template.
Split it, and when you flash it back you can just use the 512kb version.


Title: Re: Passat B5 - APU, 4B0 906 018 BD finally reads, wrong layout (I think)
Post by: dokalanyi on January 22, 2016, 04:02:00 AM
Thanks. Will flash and let you know.