|
Title: 8N0906018AP 360847 basefile open loop Post by: aef on January 23, 2016, 11:28:08 AM i created a basefile for a TT with S3 MAF and 550 Bosch EV14
rear O2 is removed Is there a reason it is open loop and not reaching lambda 1 at idle? current dtcs: 17834 N80 TANK VENT VALVE 17841 J299 SAI pump relay 17840 N112 SAI RELAY 17695 N249 SUV VALVE Title: Re: 8N0906018AP 360847 basefile open loop Post by: ddillenger on January 23, 2016, 11:33:49 AM i created a basefile for a TT with S3 MAF and 550 Bosch EV14 rear O2 is removed Is there a reason it is open loop and not reaching lambda 1 at idle? current dtcs: 17834 N80 TANK VENT VALVE 17841 J299 SAI pump relay 17840 N112 SAI RELAY 17695 N249 SUV VALVE Until you disable powerstage diagnosis you will not get trims or lambda regulation. Title: Re: 8N0906018AP 360847 basefile open loop Post by: aef on January 23, 2016, 12:06:00 PM power stage is eskonf according to the wiki
so either reconnect all four (car is a bit apart at the moment) or tell the car it is not equipped with this parts. thx |