|
Title: Is it Possible to write MPC in MED9.1 2.0TFSI ?? Post by: tobygolf66 on January 24, 2016, 02:43:21 PM Hi, did anybody know, is it possible to write MPC in MED9.1 2.0TFSI ?
I have here a damaged ECU, we tried something in the Code to implement LC Code, after writing Flash over OBD the Ecu not work. We have tried all, write back complete Ori BDM backup with EVC BDM100 , Ktag and Galletto but no result. VCDS find ECU but only shit. Someone has an idea how we can fix this ecu ?? rgds Title: Re: Is it Possible to write MPC in MED9.1 2.0TFSI ?? Post by: turbojohan on January 24, 2016, 03:19:39 PM Try this.
Johan Title: Re: Is it Possible to write MPC in MED9.1 2.0TFSI ?? Post by: tobygolf66 on January 24, 2016, 03:29:26 PM hi, thanks but what is different in this file ??
i have tried 5 or 6 ori full bdm projects , also with immo off and so on rgds Title: Re: Is it Possible to write MPC in MED9.1 2.0TFSI ?? Post by: gman86 on January 25, 2016, 06:09:07 AM Did the ECU work after it was written to BDM the first time? Writing over the port will never brick an ECU to the point where it would never work again. BDM will always recover. It must be physically damaged.
What happens when you try to start? Do radiator fans come on with ignition on? Title: Re: Is it Possible to write MPC in MED9.1 2.0TFSI ?? Post by: tobygolf66 on January 25, 2016, 06:13:30 AM we did try all, but no chance, physically ecu is ok 100%
we wrote OBD only the file with the LC code and after that Fans are running, or maybe i have damaged the MPC with wrong syntax in LC code Bootsector ?? i didn´t find the fault :-( rgds Title: Re: Is it Possible to write MPC in MED9.1 2.0TFSI ?? Post by: turbojohan on January 25, 2016, 08:15:11 AM i you write back stock with bdm it should run.
If eeprom damaged or put in from other car you need to correct immo or turn it off. Did you do checksum before writing bdm? If ecu is ok and still doesn't start and no engine light in dash check motor relais. |