|
Title: Fried Ecu Post by: TopNotch on January 31, 2016, 10:55:43 AM Long story short I picked up a gt28rs mk4 1.8t, Owner stated he burned through the 02 sensor wires and fried the ecu. Which Connecting another ecu proved to be true. Now there was a tune on the ECU for 550cc injectors and vr6 maf. Would I still be able to pull that file off the ecu to put onto the spare ecu I have? I am having issues getting the fried ecu into boot mode which I wanted to try to do before I used it on my spare.
Title: Re: Fried Ecu Post by: Rl on January 31, 2016, 02:27:33 PM Yes you can. But u ll have to copy eeprom if u want immo on. Another thing is that i had the same thing happen to my ecu and the fix was puting a new lambda driver IC i found from another ecu. If u can find ur IC it is 5min soldering.
Title: Re: Fried Ecu Post by: adam- on January 31, 2016, 02:32:59 PM No, the ECU is fried. Could always desolder the chip and attempt to recover that way. But if it's just a tune with 550cc injectors and a 3" MAF I'd just be starting with the ORI and tuning that. It'll take you longer to swap chips and hope it works than copy data from a 3" file and change KRKTE and TVUB.
Title: Re: Fried Ecu Post by: TopNotch on January 31, 2016, 05:15:50 PM Alright thanks guys! Im having trouble getting it into boot mode. The argdub program isnt working with my current computer ill get it immobilized then shouldnt be to hard to work it out from there
|