|
Title: XDF Compatibilty Question 06A906032FE / 06A906032HP Post by: nordschleife on February 01, 2016, 12:56:24 AM Apologies if this has been answered before. I have searched and can't find an answer.
I have a 2001 Audi A3 1.8T as a donor car (AUM engine code). The ECU is 06A 906 032 FE. From factory, the AUQ engine is identical to the AUM - except for the map - the actual hardware is the same but the AUQ has 180bhp compared to 150bhp in the AUM. At this stage I am not looking to tune the ECU for additional performance however I want to remove SAI, EVAP, etc as these are not present in the older car that I have fitted the 1.8T engine to. On this site there a various XDFs however none are quite right for my FE ECU. There are however many XDFs for slightly later ECU revisions such as HP. I have attempted to work through creating my own XDF for my FE however part way through this process I had an idea. Instead of creating my own XDF can I use the OEM Map from a 180bhp AUQ ECU 06A906032HP, flash this to my ECU and then use a more readily available XDF that already suits this ECU to delete SAI and EVAP? Or do I need to continue to create my own XDF? Many thanks. Title: Re: XDF Compatibilty Question 06A906032FE / 06A906032HP Post by: adam- on February 01, 2016, 03:10:39 AM I'd say so. There's my HN file too on here with a defined .kp to match. Could use that if you want. :)
Title: Re: XDF Compatibilty Question 06A906032FE / 06A906032HP Post by: nordschleife on February 02, 2016, 11:46:51 PM Thanks. It's probably the simplest option.
I'm going to have a bit of spare time on planes next week and if it works out I might have a go at making my own XDF anyway as a learning process. |