|
Title: Anyone want to help a newb connect to VCDS for first time? Post by: INControl7 on February 01, 2016, 03:04:37 PM Bought this cable http://www.ebay.com/itm/USB-cable-for-Triumph-Motorcycles-TuneECU/251088284958?_trksid=p2050601.m2372&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D17614%26meid%3D1842665441241050464%26pid%3D100085%26prg%3D8172%26rk%3D2%26rkt%3D4%26sd%3D170797175486%26%26clkid%3D1842666457672311890&_qi=RTM1562570
Downloaded the most recent drivers from http://www.ftdichip.com/Drivers/D2XX.htm, is there some other drivers im missing? When i try to connect to VCDS with my cable it says the interface isnt found I figure i better figure this out before i even try any of the other programs ;( Title: Re: Anyone want to help a newb connect to VCDS for first time? Post by: vwaudiguy on February 01, 2016, 03:10:08 PM What version of VCDS are you using?
Title: Re: Anyone want to help a newb connect to VCDS for first time? Post by: Dave9n3 on February 01, 2016, 03:37:00 PM Long shot but have you tried going into the options section and selecting USB, rather than any of the COM options and then test interface?
Title: Re: Anyone want to help a newb connect to VCDS for first time? Post by: INControl7 on February 01, 2016, 03:55:44 PM VCDS 15.7
Yep, tried all the comm ports and also USB. COMM 2 and USB are found but interface isnt found am i supposed to be using VCDS lite? Title: Re: Anyone want to help a newb connect to VCDS for first time? Post by: INControl7 on February 01, 2016, 04:53:59 PM Heres what i get from the port test
Ross-Tech usb interface not found! USB Library version: 3.02.07 Interface: Not Found! Title: Re: Anyone want to help a newb connect to VCDS for first time? Post by: vwaudiguy on February 01, 2016, 05:14:32 PM You cannot use genuine VCDS (ESPECIALLY the most recent up to date version) with anything other than a genuine cable.
Title: Re: Anyone want to help a newb connect to VCDS for first time? Post by: markpowell35 on February 02, 2016, 08:44:00 AM Try this,
just extract to desktop or C:\ and just run loader, check USB connection and should be ok. |