|
Title: n249 & missing message from cluster audi s3 Post by: zapco on February 02, 2016, 09:43:38 AM I have an audi s3 with bam engine with immo removed ecu and n249 removed.
i am getting p1650 and p1287 error codes, wich adresses i have to change in winols in order to get rid the codes and the ecu to funcion correctly? Title: Re: n249 & missing message from cluster audi s3 Post by: giles92 on February 07, 2016, 09:19:29 AM Ive had the missing message from instrument cluster code on a tt we did wideband conversion for. We sourced a jetta ecu and reflashed it and the same code exists. A cost of using the cheap awp jetta ecu. Maybe your situation is similar? It never caused any problems just exists in the background, mil was never turned on for it.
As for the n249 code, you need to locate the chain of eskonf and adjust the value on the last byte. Eskonf should look like AA FF 00 30 FF F8 30 the last byte of "30" means you have n249 on egr off sai relay on and vvt active. value of 30 in binary equals 00 11 00 00. to turn n249 off the first 00 needs to be changed to 11. 11 11 00 00 equals "F0" when put into bin to hex converter. so depending on other hardware configuration your eskonf should read AA FF 00 30 FF F8 F0. |