|
Title: me 3.8 rev limiter Post by: putput on February 15, 2016, 12:14:55 PM Hi. I'm from Spain and y have a golf mk2 1.8t.
I'm doing my maps to 1.8t gt3071r (me3.8 AQ) but I can not change the rpm limiter. I tried it with NMAXDV And NMAXF does not work Someone could help me change the limiter? Thanks Title: Re: me 3.8 rev limiter Post by: k0mpresd on February 15, 2016, 08:31:41 PM it is not a single limiter.
Title: Re: me 3.8 rev limiter Post by: putput on February 16, 2016, 03:42:18 AM So I've read. I would like to know that maps affect rev limiter and learn to modify
Title: Re: me 3.8 rev limiter Post by: putput on February 16, 2016, 11:50:13 AM I found the limiter
In an ecu AQ find the following values 8A A3 A3 A4 AA AA C8 C8 C8 C8 C8 C8 8C A6 A5 A6 A7 AA AA AA AA A8 A8 A8 8A A3 A3 A4 A8 AA If you multiply the map * 40, AA is 6800 If you change these values you get the cut in these rpm https://youtu.be/bACywFQND7c Title: Re: me 3.8 rev limiter Post by: k0mpresd on February 16, 2016, 01:31:00 PM correct.
Title: Re: me 3.8 rev limiter Post by: eliotroyano on February 17, 2016, 08:51:07 AM I found the limiter In an ecu AQ find the following values 8A A3 A3 A4 AA AA C8 C8 C8 C8 C8 C8 8C A6 A5 A6 A7 AA AA AA AA A8 A8 A8 8A A3 A3 A4 A8 AA If you multiply the map * 40, AA is 6800 If you change these values you get the cut in these rpm https://youtu.be/bACywFQND7c Nice find..... but problem is that those are not only a limiter like K0mpresd mentioned, those are group of "limiters" or values associated to it. I have notice those values too, the problem is to identify which ones are for what. 06A906018AQ is M383 and RPM limiters are in the same zones, but could share some similarities (I am not sure) with M382 ones that includes: NMAXDV Drehzahlbegrenzung bei Fehlererkennung Geschwindigkeitssignal TNMAXDV Verzögerungszeit für Drehzahlbegrenzung bei Ausfall des Geschwindigkeitssignals RED1NMX "Reduzierstufe bei Bedingung 1 der NMAX-Begrenzung ASR-Reduzierstufenauswahl Reduzierstufe" RED2NMX "Reduzierstufe bei Bedingung 2 der NMAX-Begrenzung ASR-Reduzierstufenauswahl Reduzierstufe" RED3NMX "Reduzierstufe bei Bedingung 3 der NMAX-Begrenzung ASR-Reduzierstufenauswahl Reduzierstufe" RED4NMX "Reduzierstufe bei Bedingung 4 der NMAX-Begrenzung ASR-Reduzierstufenauswahl Reduzierstufe" NMXP Drehzahlbegrenzung NMAXWP weiche Drehzahlgrenze NMAXZP Drehzahlgrenze für Zylinderabschaltung NMAXDP Dauerdrehzahlgrenze NMAXHP maximale Drehzahl für hartes Abschalten DNMAXP Drehzahlhysterese für Drehzahlbegrenzung TVMAXHP Zeitschwelle für Übergang in harte n/v-Begrenzung DZUENMP Delta ZW für weiche nmax-Begrenzung ZWVNMAXP Max. Zündwinkelverstellung für weiche n/v-Begrenzung FNMAXP Abmagerungsfaktor bei weicher n/v-Begrenzung DNMXHP Hysterese für Drehzahlgrenzen NMAXWHP Umschaltschelle Drehzahlberenzung hart -> weich Title: Re: me 3.8 rev limiter Post by: putput on February 17, 2016, 11:41:19 AM I changed the 7 "AA" values (all for the same) and works well.
i dont know the function of the other value maps anyone knows the function of the other values? I only have this maps in my ecu NMAXDV NMAXF RED1NMX RED2NMX RED3NMX RED4NMX TNMAXDV The cut is very slow, anyone know if there is any value to the cutoff time? Sorry for my english. It is bad ;D Title: Re: me 3.8 rev limiter Post by: Tezotto01 on June 01, 2017, 05:31:26 PM I found the limiter In an ecu AQ find the following values 8A A3 A3 A4 AA AA C8 C8 C8 C8 C8 C8 8C A6 A5 A6 A7 AA AA AA AA A8 A8 A8 8A A3 A3 A4 A8 AA If you multiply the map * 40, AA is 6800 If you change these values you get the cut in these rpm https://youtu.be/bACywFQND7c I have already located this region and changed the AA values, but I did not succeed. Could someone help me find the limiter in my bin? Title: Re: me 3.8 rev limiter Post by: Tezotto01 on June 12, 2017, 04:46:31 AM I got it, I was missing the address.
Now it worked perfectly! Title: Re: me 3.8 rev limiter Post by: BlackT on October 02, 2021, 12:28:15 AM Can someone help I am struggling to find Nmax map in 559C
Right is AGU file where I found it, but comparing to AEB file I can't found it Title: Re: me 3.8 rev limiter Post by: Leonhard on October 02, 2021, 01:48:15 AM this is what I got, similar to 558E
06C42 NMAXDV 06C44 TNMAXDV 06C46 RED1NMX 06C47 RED2NMX 06C48 RED3NMX 06C49 RED4NMX 06DD2 NMAXF (16Bit) Title: Re: me 3.8 rev limiter Post by: prj on October 02, 2021, 02:06:01 AM If I remember this correctly these are rpm's when it starts to cut individual cylinders.
And it's best not to set everything to the same value otherwise it's like driving into a wall. Title: Re: me 3.8 rev limiter Post by: BlackT on October 02, 2021, 06:54:09 AM this is what I got, similar to 558E Thank you but I need NMAX 5x6 map06C42 NMAXDV 06C44 TNMAXDV 06C46 RED1NMX 06C47 RED2NMX 06C48 RED3NMX 06C49 RED4NMX 06DD2 NMAXF (16Bit) If I remember this correctly these are rpm's when it starts to cut individual cylinders. And it's best not to set everything to the same value otherwise it's like driving into a wall. I am going to set it little higer all values, then try to put ignition cut to oroginal rpm via KFSRL Title: Re: me 3.8 rev limiter Post by: Leonhard on October 03, 2021, 11:19:58 PM Ok, how about 07B64 NMAX 6x5 (8Bit)
Title: Re: me 3.8 rev limiter Post by: BlackT on October 04, 2021, 12:57:34 AM Ok, how about 07B64 NMAX 6x5 (8Bit) Please see pic I put in attachment aboveOn that address is MLHFM EDIT: or maybe it is, I am going to try, because this is not MLHFM 100% my bad sorry Title: Re: me 3.8 rev limiter Post by: ZpiXDK on October 10, 2021, 08:44:03 AM To rise the RPM Limit to 7000:
NMAXDV - Drehzahlbegrenzung bei Fehlererkennung Geschwindigkeitssignal - 7000 NMAXF - Fehlererkennung nmax – Überschreitung - Diagnosis - 7300 And in my AGU 06A906018R 359591 @ 0732A 8bit 30x1 Original: 8A A3 A3 A4 AA AA C8 C8 C8 C8 C8 C8 8C A5 A6 A6 AA AA A7 A8 A8 A8 AA AA 8A A3 A3 A4 A8 AA Changed to: 8A A3 A3 A4 AF AF C8 C8 C8 C8 C8 C8 8C AF AF AF AF AF AF AF AF AF AF AF 8A A3 A3 A4 AF AF -So I changed from A5 and up (beside C8, which gives 8000) -in the 30x1 map: Number 4,5, 13-23, 28 and 29. And you need to raise the axis to 7000 in all the maps. If I remember this correctly these are rpm's when it starts to cut individual cylinders. And it's best not to set everything to the same value otherwise it's like driving into a wall. This I will look more into, guessing it may be A5, A6, A7 and A8. Title: Re: me 3.8 rev limiter Post by: ZpiXDK on October 10, 2021, 08:51:07 AM Please see pic I put in attachment above On that address is MLHFM EDIT: or maybe it is, I am going to try, because this is not MLHFM 100% my bad sorry MLHFM - 0795C NMAX - 07B64 |