|
Title: Trigger angle offset in ME7 Post by: alexs307 on February 23, 2016, 01:22:11 AM Does anyone know the abbreviation in damos for the trigger angle offset in ME7 ecu's ( should be similar in Me1.5.5 I guess )? Is this adjustable? I ask this because I am almost sure that during last engine rebuild of my Z20LET speedster, we've used a C20LET crankshaft, the trigger wheel has same 60-2 teeth setup on both engines, but I think the trigger angle offset is different, must measure this to be 100% sure today.
If necessary, I can pay for this info. Regards, Title: Re: Trigger angle offset in ME7 Post by: janne on February 24, 2016, 03:56:33 AM Yes there is.
I know it in vag me7 but not opel one. there is also values for teeth number and missing ones. i can look value names in vag me7 so you can look are those same in opel one ? Title: Re: Trigger angle offset in ME7 Post by: janne on February 24, 2016, 03:57:58 AM Btw normally motronic use 76 trigger angle in 60-2 wheel
Title: Re: Trigger angle offset in ME7 Post by: alexs307 on February 25, 2016, 11:28:54 PM Yes, abbreviations should be the same in ME7 and ME1.5.5 as long as they share same structure in my opinion.
|