|
Title: ME7.5 IMMO Off and can't write to Flash Post by: everydayparadise on February 29, 2016, 05:08:03 PM So I'm working on doing IMMO off on the EPPROM on two ECU's and I have an interesting thing going on. The ecus are 06A906032SM (files attached) and 06A906032NK and the behavior is identical between the two.
When I have the IMMO ON file loaded on the ECU I can read and write to the ECU all day long. When I have the IMMO OFF file loaded on the ECU I can read but I can't write at all. I have tried writing with MPPS, Galletto, and Nefmoto and all fail. When I load the IMMO ON file back on the ECU I can read and write to the ECU all day long again. any ideas on what is wrong with my IMMO off file that would cause this? Title: Re: ME7.5 IMMO Off and can't write to Flash Post by: ddillenger on February 29, 2016, 06:36:34 PM Lotta chanes between those two files, most not immobilizer related. Please explain what you've done, and why.
Title: Re: ME7.5 IMMO Off and can't write to Flash Post by: everydayparadise on February 29, 2016, 06:44:10 PM It was done by a friend... so I don't have all the details. I'll take it from your response that I need to go in and start over.
Title: Re: ME7.5 IMMO Off and can't write to Flash Post by: k0mpresd on February 29, 2016, 08:57:39 PM Lotta chanes between those two files, most not immobilizer related. Please explain what you've done, and why. i think all that was done was copy the vin and such from 1 to the other. whoever did it was obviously very unsure about the proper way. as in, just the 4 edits in the original file. |