NefMoto

Technical => Tuning => Topic started by: linus633 on March 06, 2016, 04:10:13 PM



Title: Seat Leon Cupra R Stage 2
Post by: linus633 on March 06, 2016, 04:10:13 PM
Hello, i have a small Problem,

i bought a Seat Leon Cupra R (210hp) which is already chipped to 265hp.
I tried to read the ecu with my mpps to mod it a little for launch control but the tuner before encrypted it. (see the file attached) So i have no possibility to edit...
Does somebody have a stage 2 file which is not encrypted?

Bosch Hardware Number: 0261207952
Bosch Software Number: 1037363579
Vw Software Number: 1ML906032 0001
System Type Number: 1.8l R4/5VT G01

Engine Code is AMK

Btw sorry for my bad english, im german :-)


Title: Re: Seat Leon Cupra R Stage 2
Post by: adam- on March 07, 2016, 12:54:08 AM
Not for free.


Title: Re: Seat Leon Cupra R Stage 2
Post by: aef on March 07, 2016, 01:17:09 AM
List your hardware mods.
What is a stage2 over there in germany?



Title: Re: Seat Leon Cupra R Stage 2
Post by: linus633 on March 07, 2016, 03:34:17 AM
Not for free.

I never said for free, i pay , no problem

My Hardware mods are:
3 inch exhaust (milltek)
Big Downpipe
no catalysator
Free flow intake
Big intercooler
Oilcooler
Forge silicon tubes
Forge blow off

It has acual 265hp, i tested it on a dyno would be great if the new file is in that range.


Title: Re: Seat Leon Cupra R Stage 2
Post by: aef on March 07, 2016, 04:34:05 AM
Do you use Aral102 fuel?

No conrods, no more power :)
How much boost?

Please post log with me7logger.


Title: Re: Seat Leon Cupra R Stage 2
Post by: linus633 on March 07, 2016, 04:39:59 AM
I have upgrade conrods and upgrade pistons, actually the car makes ~ 1.7bar

I will post the log this evening, when i am at home :-)


Title: Re: Seat Leon Cupra R Stage 2
Post by: sonique on March 07, 2016, 06:51:40 AM
file only NO READ tag
but mpps not master tools, not able read this file
use bootmode or galetto etc and read good file


Title: Re: Seat Leon Cupra R Stage 2
Post by: linus633 on March 07, 2016, 06:58:11 AM
Should i buy something like that?
http://www.ebay.de/itm/Super-OBD2-USB-Galletto-V1260-EDC16-15-ECU-Flasher-Motorsteuergeraete-Vista-/390100186704


Title: Re: Seat Leon Cupra R Stage 2
Post by: aef on March 07, 2016, 09:26:51 AM
I would say your K04 is at its maximum with 1,7bar.
If you are not using 102ron, thats the only thing you can do for now.

no need to read your file and this place is not the one to paste your pro-file


Title: Re: Seat Leon Cupra R Stage 2
Post by: turbojohan on March 07, 2016, 01:36:26 PM
just solder of the chip and read it.

or your mpps is a slave tool or it just messed up the whole file while reading.

Johan


Title: Re: Seat Leon Cupra R Stage 2
Post by: _nameless on March 07, 2016, 06:59:39 PM
not full rea, no read tag in file.


Title: Re: Seat Leon Cupra R Stage 2
Post by: sonique on March 07, 2016, 08:31:53 PM
.


Title: Re: Seat Leon Cupra R Stage 2
Post by: sonique on March 07, 2016, 08:34:56 PM
just solder of the chip and read it.

or your mpps is a slave tool or it just messed up the whole file while reading.

Johan

or try mpps generic boot mode
working ;)


Title: Re: Seat Leon Cupra R Stage 2
Post by: JBL-GG on March 09, 2016, 12:30:22 AM
our mates are right, its encrypted coused by NOREAD V2 in file - the thing is that tools like CMD, KESS,
MPPS... stay behind these convention and dont read the file then, but you could for sure use
a FGTECH2 or old GALLETTO1250/60 as well via OBD usually - otherwise bootmode/desoldering of psop44 i guess
and read it by batronix, willem, gallep, advantech will be fine!

but dont forget to take away by hex-editor the NOREAD (at the bottom most of the time), otherwise OLS-"Demo"
could no process the file

and if im honest about your tunefile, could be very professional in germany as well as "crap", im sorry to say that
there are many cheater's in germany what tell powergains that are not applicable.. anyway youve been on a dyno ;) !

but just dont think that thats now the over-pro-tune in there, ive my self also unsealed and opened a MTM ECU once
and i was near to spit in the ECU and close it again, i just mean on the MTM ECU their solder-job.. totally messed up!!! and
MTM is one of known famous german tuners :)

good luck and let us know if you managed it
regards


Title: Re: Seat Leon Cupra R Stage 2
Post by: linus633 on March 09, 2016, 12:45:39 AM
Thanks @ all it worked, i successfully read the file :)