|
Title: AutoIT script to simplify Me9 IDA Loading Post by: littco on March 07, 2016, 12:01:53 PM Its very much in its early stages but uses PRJ original Me7 script to load ME9 files, I've used Basano and 1 others previous posts to create this, Version 1 will load the file for you a simple selection of the ROM and then C will do the analysis for you.
Version 2 also loads the split maps from 1c0000 to 1fffff and has the original Analysis GUI , but as such untested. Also as I did this with IDAPRO 5.1 it doesn't have the SDA (r13) address listed so the variables arenot shown correctly. I have version 6.1 as well and once I have tested I will upload to both versions. Like I say it's not perfect but at least it loads it up and gives you a disassembled view of your file.. Now with V6.1 V6.1_v2 with Analysis GUI added Title: Re: AutoIT script to simplify Me9 IDA Loading Post by: bushwookie on November 10, 2020, 06:28:59 AM Sorry for necropost.
Managed to get this script to load the ROM in with IDA v7.0.191002, but then it hangs up after the "start analysis" button is pressed. Seems to try closing IDA, but is stopped by the exit prompt. Clicking save brings up the save as prompt, and the filename begins filling with fuyfuyfuy. Any links to IDA v6.1 I can try? Title: Re: AutoIT script to simplify Me9 IDA Loading Post by: bushwookie on November 18, 2020, 06:01:38 AM I found a version of IDA Pro v6.8.150423 and changed the script's first line to "WinWaitActive("IDA v6.8.150423")"
And it runs OK now. I can see now that the IDA Free version I had was not able to decompile PowerPC processors, specify TOC address etc. |