Title: VAG ME7.5 chceck immo off please Post by: rysiektr on November 30, 2016, 02:58:10 PM Hello Everyone
I swaped 1.8T auq engine to VW golf mk2 and I try to turn off immo. In attach is OEM immo on dump and my immo off dump. Please check it is that immo is off ok, and the checksum is correctly because when I write immo off dump to ECU then I have P0601 error in ECU. Thank's a lot. Title: Re: VAG ME7.5 chceck immo off please Post by: jogtx16v on November 30, 2016, 07:43:58 PM I think the checksum is not good.
Title: Re: VAG ME7.5 chceck immo off please Post by: _nameless on November 30, 2016, 08:56:27 PM Use this for immo off should be able to flash and start it no problem
http://nefariousmotorsports.com/forum/index.php?action=dlattach;topic=3319.0;attach=5504 Title: Re: VAG ME7.5 chceck immo off please Post by: rysiektr on January 18, 2017, 12:31:57 PM Use this for immo off should be able to flash and start it no problem http://nefariousmotorsports.com/forum/index.php?action=dlattach;topic=3319.0;attach=5504 Thank's a lot. In your .bin VIN number is "XXXXX", if I write this in ECU, then VAG-COM will show VIN and ECU number correctly? Title: Re: VAG ME7.5 chceck immo off please Post by: Jim_Coupe on January 20, 2017, 07:48:33 AM Use this for immo off should be able to flash and start it no problem http://nefariousmotorsports.com/forum/index.php?action=dlattach;topic=3319.0;attach=5504 Thanks Marty I had exact same problem :) Works on my new wideband ECU.... :) :) :) ;D |