|
Title: Cant Read ECU Post by: fischkopf on February 05, 2017, 10:59:21 AM Hi,
i have tried to read the Skoda Fabia I 1,9 TDI 2001 ECU 038906019AF When i set up the memory layout and try to read the ecu it sounds like the ecu gets restarted and i can hear something like a pump.. But after a few messages, something like check security communication fails... First i thought maybee there is a cable problem? I use a FTDI / LM339 Cable, what i presume should work.. Is there maybee a different ept/driver bundle that fixes my problems? Thanks Title: Re: Cant Read ECU Post by: h100vw on February 06, 2017, 04:47:58 AM Hi, i have tried to read the Skoda Fabia I 1,9 TDI 2001 ECU 038906019AF When i set up the memory layout and try to read the ecu it sounds like the ecu gets restarted and i can hear something like a pump.. But after a few messages, something like check security communication fails... First i thought maybee there is a cable problem? I use a FTDI / LM339 Cable, what i presume should work.. Is there maybee a different ept/driver bundle that fixes my problems? Thanks It only works on ME7 mate/ Title: Re: Cant Read ECU Post by: fischkopf on February 06, 2017, 12:06:40 PM It only works on ME7 mate/ I tought nefmoto works whit EDC15?Title: Re: Cant Read ECU Post by: nyet on February 06, 2017, 04:30:34 PM Title: Re: Cant Read ECU Post by: fischkopf on February 06, 2017, 11:57:14 PM How can i read EDC15?
Title: Re: Cant Read ECU Post by: gman86 on February 07, 2017, 03:23:23 AM How can i read EDC15? With another tool that supports EDC15 Title: Re: Cant Read ECU Post by: fischkopf on February 07, 2017, 05:02:51 AM With another tool that supports EDC15 Wich one you suggest? If possible i would prefere to use my ftdi dumb cable...I have tried galletto but nothing happens.... Can Vag k+can commander do this? Title: Re: Cant Read ECU Post by: nyet on February 07, 2017, 11:37:50 PM Kess, MPPS etc.
Title: Re: Cant Read ECU Post by: fischkopf on February 08, 2017, 12:24:14 AM Kess, MPPS etc. Is there oune i can use whit ftdi cable?Title: Re: Cant Read ECU Post by: fischkopf on February 08, 2017, 04:57:24 AM I have tried Galletto, but no luck, do i need to flasch on bench by pulling the program pin to ground?
Title: Re: Cant Read ECU Post by: _nameless on February 08, 2017, 07:57:37 AM I have tried Galletto, but no luck, do i need to flasch on bench by pulling the program pin to ground? boot mode with galletto will workTitle: Re: Cant Read ECU Post by: jochen_145 on November 08, 2017, 03:20:32 AM Now I am confused with this:
boot mode with galletto will work Galletto (even the clones and old ones) work on EDC15 on bench, with "normal" protocol. Successfully a 100-times.Why you propose BootMode for flashing ? AFAIK bootmode is just necessary, if the EDC15 is bricked?! But I never tryed to re-cover with bootmode option of Galletto. I though this only works on ME7.. Are you able to re-cover a EDC15 with ME7-BooMode-function of Galletto too ? Title: Re: Cant Read ECU Post by: birchbark506 on November 11, 2017, 03:22:27 PM i tried MPPS on a 2001 mk4 jetta 1.8T and its unable to read just write
Title: Re: Cant Read ECU Post by: vwaudiguy on November 11, 2017, 08:24:31 PM i tried MPPS on a 2001 mk4 jetta 1.8T and its unable to read just write You have to use a different protocol than what you would normally choose. I can't remember at the moment which I use. Title: Re: Cant Read ECU Post by: birchbark506 on November 11, 2017, 11:36:29 PM ok if you remember please let me know
|