|
Title: Simos 6.22 Flashing/Cloning Post by: Hollywood on February 10, 2017, 09:42:44 AM How is everyone cloning Simos 6.22 - Audi A6 ECU?
I have heard clone BDM100 can work, but I haven't found coverage in software. suggestions please? I have Fvdi, bdm100, fgtech to work with. All clones. Title: Re: Simos 6.22 Flashing/Cloning Post by: k0mpresd on February 10, 2017, 09:50:25 AM it works. coverage is disguised, so to speak.
Title: Re: Simos 6.22 Flashing/Cloning Post by: Hollywood on February 14, 2017, 08:19:10 AM it works. coverage is disguised, so to speak. with 1255 CMD? Ive tried to read as other ecus and nothing works. Could you point me in the right direction? I'm stumped. Title: Re: Simos 6.22 Flashing/Cloning Post by: Hollywood on February 16, 2017, 09:03:36 AM I managed to get BDM100 to fully read it with v1255 as BMW/Siemens MSV70/MSS70 and the connections shown above.
Title: Re: Simos 6.22 Flashing/Cloning Post by: Hollywood on February 16, 2017, 02:06:25 PM Also needed to copy 95320 manually with eeprom reader. Failure message in CMD for eeprom write protect, but wrote flash and AM29BDD160GB with out an issue.
Title: Re: Simos 6.22 Flashing/Cloning Post by: k0mpresd on February 16, 2017, 03:02:00 PM if you receive any read/write error, you are doing it wrong.
|