|
Title: FT232R Cable not working Post by: Pasteurised on March 03, 2017, 01:58:52 PM Hey guys, having trouble with this cable and Nefmoto.
The software can see the cable but when i try to connect it gives me the "failed to read test echo from FTDI device" error. Its definitely in dumb mode. This is the Device info nefmoto gives me, do i need to change anything in FTprog? (http://s20.postimg.org/sk4suw4gd/screenshot_27.png) Thanks Title: Re: FT232R Cable not working Post by: nyet on March 03, 2017, 02:10:58 PM Is it connected to a powered up ECU?
Title: Re: FT232R Cable not working Post by: Pasteurised on March 03, 2017, 02:17:13 PM Thank for the quick reply.
Yes its plugged in and car ignition switched on. VCDS connects no problem. Title: Re: FT232R Cable not working Post by: AARDQ on March 03, 2017, 02:39:44 PM On occasion (25% of the time?) I have to put VCDS through Test, save the config and close VCDS and then Nef will see the cable. Has to be plugged into the USB before plugging in to the OBD.
Title: Re: FT232R Cable not working Post by: Pasteurised on March 03, 2017, 02:45:16 PM ok thanks ill give that a try
plug in usb plug in obd run vcds test run nefmoto Title: Re: Post by: Alex90 on March 05, 2017, 04:34:37 AM Try without start the cluster ... the cluster is one gateway and sometime block the comunication
Sent from my SM-G930F using Tapatalk Title: Re: Post by: moiko on July 23, 2017, 11:05:19 AM Try without start the cluster ... the cluster is one gateway and sometime block the comunication I have the same problem with my cable and nefmoto. Can you be more specific in how i start without the cluster? Haha i’m sorry it must be a dumb questionSent from my SM-G930F using Tapatalk |