|
Title: dump firmware from haldex gen4 controller Post by: k0mpresd on April 12, 2017, 11:19:13 PM p0l.4 and tx/rx found in zip file.
also connect rstin to 5v via switch. Quote _connect _clearselections _addselection 00000,4ffff _upload _save test.hex read the datasheet. ;) http://www109.zippyshare.com/v/jUebJZbj/file.html Title: Re: dump firmware from haldex gen4 controller Post by: aef on April 12, 2017, 11:31:18 PM :)
Hat's off to you! Title: Re: dump firmware from haldex gen4 controller Post by: vwaudiguy on April 12, 2017, 11:34:18 PM Yugo boi
Title: Re: dump firmware from haldex gen4 controller Post by: k0mpresd on April 13, 2017, 12:12:11 PM do not even know why i bother posting. we are too busy worried how we can steal vcds cables and too lazy to actually use an application for all its functionality.
but maybe there is still hope. write controller: Initializing ST10Flasher.dll Init COM1 at 9600 bauds *LOAD MONITOR-->OK * ERASE BANKS -->OK *LOAD HEXFILE:F:\WinOLS 0BR907554C 0_7FFF (Original) - .hex-->OK *FILE INFO FOR FILE:WinOLS 0BR907554C 0_7FFF (Original) - .hex Size = 32768 bytes. Programming time = 35 s. Block(s): 0, 1, 2, 3 *PROGRAM FLASH MEMORY -->OK *LOAD HEXFILE:F:\WinOLS 0BR907554C 18000_4FFFF (Original) - .hex-->OK *FILE INFO FOR FILE:WinOLS 0BR907554C 18000_4FFFF (Original) - .hex Size = 229376 bytes. Programming time = 239 s. Block(s): 4, 5, 6, 7 *PROGRAM FLASH MEMORY -->OK Title: Re: dump firmware from haldex gen4 controller Post by: vwaudiguy on April 13, 2017, 12:26:09 PM WAIT. We can steal VCDS cables????????????? Where do I sign up??
Title: Re: dump firmware from haldex gen4 controller Post by: john9357 on July 13, 2018, 05:14:14 AM k0mpresd, the link is dead. can you reupload? thanks
Title: Re: dump firmware from haldex gen4 controller Post by: k0mpresd on July 13, 2018, 07:17:23 AM k0mpresd, the link is dead. can you reupload? thanks you can find p0l.4, tx, rx in the data sheet of the mcu. then the rest needed is posted in this thread. Title: Re: dump firmware from haldex gen4 controller Post by: john9357 on July 13, 2018, 07:30:29 AM ahh i think it's dump! i have already the pin for bm. Its possible to post yout ori?
Title: Re: dump firmware from haldex gen4 controller Post by: purepower on July 22, 2018, 07:31:20 AM Sorry guys.
First of all which tool are you using to read the Haldex Controller? I can't catch this point. Thank you Title: Re: dump firmware from haldex gen4 controller Post by: Danielsvamp on November 03, 2023, 04:05:12 AM ^^^
+1 |