|
Title: Moates Emulator Post by: vdubnation on May 06, 2017, 01:57:20 PM Hey Guys ,
I have had a Moates Emulator sitting on my self for a few years decided to put it to work. I m having a issue where i can get the car running & make changes with PRJ's tool. Problem is i can not connect with vcds get a short to ground fault when running. I can connect to car with engine off as soon as i turn it on light turns red no coms. Tried a stock ecu no issues. Also when the emulator is in every cycle it bricks have to unplug ecu wait a minute clear eeprom code and she fires up. The e2p is already in test mode I m using a byteswap board . Anyone have some insight ? Video Action : https://youtu.be/bsMlG1FPi0E Title: Re: Moates Emulator Post by: vdubnation on May 10, 2017, 05:16:14 PM Problem resolved car had underlying conditions that caused no k line coms .
|