NefMoto

Technical => Tuning => Topic started by: HelperD on December 04, 2017, 09:03:06 PM



Title: Disabling LTFTs/NOLRA Switching on the Fly MBOX
Post by: HelperD on December 04, 2017, 09:03:06 PM
Hi everyone :)

This is all reiterated in the map pack provided (comments tab) but just in case I will leave full instructions here as well.

I have made a simple function that can disable NOLRA on the fly using the Cruise Control Switch.

In this case NOLRA is set to 7 using some custom code which will completely disable LTFT for tuning purposes. This function will be triggered with cruise control disabled only (Main Cruise Switch Off). 

Setting NOLRA to 7, according to DD, was the way to eliminate LTFT altogether. 

Setting NOLRA to 5, according to the S4 Tuning Wiki, is the proper way to do it. 

If you would like to switch NOLRA to 5 from 7 all you must do is take the first digit of this map and change it from a 7x to a 5x.

I.E if this map is 78 (In 8bit Hex View) then you will switch this map to 58 to accomodate for a NOLRA of 5.

I understand that this may not be of any help to most if not all of you but it's just a test function I have been working on for switchable mapping and if anyone can use this function to their benefit, here it is!

As long as cruise control is active this function will not work and NOLRA will return to its original programming. 

Sincerely,

Christian

Looks like Neft isn't letting anyone add any attachments as of right now? Either way here is the link :)

http://megashare.megahd.com.br/5Fc

This specific mod has been done to the following file:

ME7.1 8D0907551M 0002
360857
0261207143


Title: Re: Disabling LTFTs/NOLRA Switching on the Fly MBOX
Post by: Hollywood on December 06, 2017, 08:47:17 AM
This is rad. Have you found any differenced between 5 and 7?


Title: Re: Disabling LTFTs/NOLRA Switching on the Fly MBOX
Post by: HelperD on December 06, 2017, 09:25:39 AM
This is rad. Have you found any differenced between 5 and 7?

I honestly have never tried 5, always 7 so this is why I have set it up like this :)
Feel free to report back if you notice a difference


Title: Re: Disabling LTFTs/NOLRA Switching on the Fly MBOX
Post by: vwaudiguy on December 06, 2017, 09:40:08 AM
As long as cruise control is active this function will not work and NOLRA will return to its original programming. 

Hey, Christian. Cool patch, and thanks for sharing. Can you be more specific about how to activate/ de-activate the function? Just using the cruise control on/off?

Cruise switch on = OEM operation
Cruise off = no trims

Thanks


Title: Re: Disabling LTFTs/NOLRA Switching on the Fly MBOX
Post by: HelperD on December 06, 2017, 10:56:37 AM
Sorry for the confusion man.

It is just as you have interpreted it :)

Cruise switch on = OEM operation
Cruise off = no trims


Title: Re: Disabling LTFTs/NOLRA Switching on the Fly MBOX
Post by: lphsail21 on December 08, 2017, 05:22:14 AM
Is it possible to implement this on all ME7.5 or 7.5.5 ECU Bins? I will take a look and see what's involved. Thanks for this awesome share!


Title: Re: Disabling LTFTs/NOLRA Switching on the Fly MBOX
Post by: HelperD on December 08, 2017, 08:57:36 AM
If you upload your bin I will be more than happy to implement the patch for you :)


Title: Re: Disabling LTFTs/NOLRA Switching on the Fly MBOX
Post by: lphsail21 on April 01, 2018, 12:45:32 AM
I know it's been ages, but if you'd be so kind and implement this in my stock BIN, I'd be very grateful and most definitely give you extensive feedback. The 1.8t has been getting some work done and is finally ready for more tuning.

PS: I just wanted to point out that my factory NOLRA is set to 36 (decimal) and to disable LTFT I am setting it to 7. You can find it at 0x19188.

I got my fingers crossed that I get a reply from you here ;-)  8)


Title: Re: Disabling LTFTs/NOLRA Switching on the Fly MBOX
Post by: HelperD on April 05, 2018, 10:02:52 AM
Here you are, sorry for the delay!

Cruise ON = NOLRA @ your stock value.
Cruise OFF = NOLRA @ 7 as per your request.

If any issues pop up with it not functioning let me know.

Checksums are correct :)

Christian


Title: Re: Disabling LTFTs/NOLRA Switching on the Fly MBOX
Post by: lphsail21 on April 06, 2018, 02:26:58 AM
Here you are, sorry for the delay!

Cruise ON = NOLRA @ your stock value.
Cruise OFF = NOLRA @ 7 as per your request.

If any issues pop up with it not functioning let me know.

Checksums are correct :)

Christian

Thank you, this is so awesome, I really appreciate it and will report back shortly with results.

Can you elaborate at all on the source of the code change or what area of code was over/rewritten?

Best wishes,
LPH


Title: Re: Disabling LTFTs/NOLRA Switching on the Fly MBOX
Post by: HelperD on April 06, 2018, 12:46:56 PM
No problem.  There is not much to it and some basic disassembly skills should explain all :)

Basically just finding where NOLRA's value is gathered from and redirecting the value depending on the condition (in this case cruise control on/off).

Christian


Title: Re: Disabling LTFTs/NOLRA Switching on the Fly MBOX
Post by: up50lut3 on August 07, 2018, 09:14:49 PM
link is dead? can this be implemented into my hs file? thanks either way!


Title: Re: Disabling LTFTs/NOLRA Switching on the Fly MBOX
Post by: HelperD on August 14, 2018, 10:46:36 PM
What would you like your NOLRA, when switched, set to?


Title: Re: Disabling LTFTs/NOLRA Switching on the Fly MBOX
Post by: sonflasch on August 20, 2018, 08:45:26 PM

Looks like Neft isn't letting anyone add any attachments as of right now? Either way here is the link :)

http://megashare.megahd.com.br/5Fc

This specific mod has been done to the following file:

ME7.1 8D0907551M 0002
360857
0261207143


Can you reupload the file/link pls


Title: Re: Disabling LTFTs/NOLRA Switching on the Fly MBOX
Post by: streacy on November 08, 2019, 07:55:22 AM
Link is not working, can someone re upload. Thanks


Title: Re: Disabling LTFTs/NOLRA Switching on the Fly MBOX
Post by: EP997 on February 21, 2020, 11:30:12 AM
Im trying to disable LTFT on a MED17 and haven't had any luck.

I found NOLRA and its set to 36 (decimal 8bit) in stock file and setting it to 5 or 0 didn't work.

Not sure what else I need to do or if there's other settings that need to be done? 


Title: Re: Disabling LTFTs/NOLRA Switching on the Fly MBOX
Post by: Imho on July 16, 2020, 09:20:44 AM
Any one have NOLRA location for 551M ? seems not be that easy to find..


Title: Re: Disabling LTFTs/NOLRA Switching on the Fly MBOX
Post by: thedrill on July 16, 2020, 02:00:36 PM
Try 18CD5.


Title: Re: Disabling LTFTs/NOLRA Switching on the Fly MBOX
Post by: Imho on July 17, 2020, 09:06:04 AM
Thanks will check it as soon as I get to my PC.
By chance anyone stored function HelperD posted in first post ?

just checked the 551M orginal file, 0x18CD5 => 0x04 does not look right..



Title: Re: Disabling LTFTs/NOLRA Switching on the Fly MBOX
Post by: jdm on July 17, 2020, 08:16:06 PM
0x18CD5 is correct for 551M.  Default/enabled = 04, set to 07 to disable trims.


Title: Re: Disabling LTFTs/NOLRA Switching on the Fly MBOX
Post by: Imho on July 19, 2020, 12:35:35 AM
0x18CD5 is correct for 551M.  Default/enabled = 04, set to 07 to disable trims.

thanks for clarifications ;)


Title: Re: Disabling LTFTs/NOLRA Switching on the Fly MBOX
Post by: thedrill on July 19, 2020, 02:18:24 PM
your welcome.