NefMoto

Technical => Cluster and Immobilizer => Topic started by: toothy91 on February 06, 2018, 01:28:52 PM



Title: 06A906032CL immo help
Post by: toothy91 on February 06, 2018, 01:28:52 PM
so i have been lurking around here for some time and trying to learn on my own but im at the point where i need help. ive been looking up how to do an immo defeat on my 2000 golf ecu because i currently have it in my 90 corrado.

i have really only found a picture that has helped me saying i need to change 12 and 22 to 02 and end of line 020 and to the math of (SUM(2-1) for the check sum, to me it seems like a correct formula but its not working in the car and it fires once and shuts down then cuts off fuel pump prime and spark ect so i know the immo isn't defeated. ill attach both original and what i did files. if anyone could explain what im doing wrong the help would be greatly appreciated.


Title: Re: 06A906032CL immo help
Post by: dbreeze on February 06, 2018, 03:47:45 PM
You are correct with the 01 -> 02 change but the checksum calculation is actually = (FFFF - (page# - 1)) - (sum of the first 14 bytes of the page). This must be done for both pages since they both have the 01 -> 02 change.

I attached a screenshot of the differences between both of your uploaded files and another of your original file compared to one using the correct checksum. Differences between the files are in red.


Title: Re: 06A906032CL immo help
Post by: toothy91 on February 07, 2018, 08:58:49 AM
so if i apply this to mine your saying its (65535 (2-1) - (842) = 64,692 then from there you swap it back to hex, FCB4, then you flip it so its B4FC correct? if so that makes much more sense. thanks for the help, ill see if it works tonight, if it starts then im on to making the mk4 cluster work with the chassis lol


Title: Re: 06A906032CL immo help
Post by: dbreeze on February 07, 2018, 07:02:49 PM
Correct, yours should look like the right side of the second photo. Haha, good luck!