|
Title: Touareg Kessy cloning (Siemens VDO) Post by: TRespect on March 07, 2018, 03:06:08 PM I have kessy part number 3D0909135J.
I want to get a used kessy and clone mine onto it as a backup. What tools do I need to acheive this? I read about carprog. Can this be done with nefmoto soft and a ft232rl cable? The kessy is a siemens VDO. Title: Re: Touareg Kessy cloning (Siemens VDO) Post by: TRespect on March 09, 2018, 03:03:47 AM No info?
Title: Re: Touareg Kessy cloning (Siemens VDO) Post by: vdubnation on March 10, 2018, 10:08:07 PM You can desolder the 93c86 or read with test clip and burn to replacement kessy.
Title: Re: Touareg Kessy cloning (Siemens VDO) Post by: TRespect on March 11, 2018, 05:47:16 AM I prefer the test clip. Which tool?
carprog or other ? Title: Re: Touareg Kessy cloning (Siemens VDO) Post by: vdubnation on March 11, 2018, 09:11:14 AM chip reader i use gq-4x
Title: Re: Touareg Kessy cloning (Siemens VDO) Post by: TRespect on March 11, 2018, 10:37:16 AM I checked this tool. You have to desolder the eeprom. I'd rather not do that. Would carprog do the job with the clip adaptor?
Title: Re: Touareg Kessy cloning (Siemens VDO) Post by: TRespect on March 11, 2018, 10:41:59 AM Anybody replaced a kessy part number 3D0909135J with 3D0909135N ?
Title: Re: Touareg Kessy cloning (Siemens VDO) Post by: aef on March 12, 2018, 12:57:22 AM I checked this tool. You have to desolder the eeprom. I'd rather not do that. Would carprog do the job with the clip adaptor? wrong, you can use the a clip with this reader too http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=4406 Title: Re: Touareg Kessy cloning (Siemens VDO) Post by: TRespect on March 12, 2018, 03:34:33 AM Thanks for the link. I'm new to all this :-)
I guess I'm going to go with CarProg: http://codecard.eu/carprog/software/immobilizer/s4-7-kessy-tool-a8-toureg-phaeton-cayenne-pin-code-reader/prod_167.html Title: Re: Touareg Kessy cloning (Siemens VDO) Post by: TRespect on March 22, 2019, 08:40:20 AM It's been a while. I just received a used kessy.
Will be cloning it soon. i'm going for carprog. http://www.codecard.eu/carprog/software/programmer/s4-7-kessy-tool-a8-toureg-phaeton-cayenne-pin-code-reader/prod_167.html |