NefMoto

Technical => Cluster and Immobilizer => Topic started by: birchbark506 on April 06, 2018, 04:23:58 PM



Title: Replaced ignition and my immo off ECU saying immo active
Post by: birchbark506 on April 06, 2018, 04:23:58 PM
I had to replace my ignition and key and my e2p is immo off and for some reason my immo is now active

I end up swapping the chip in the key fob and now works


Title: Re: Replaced ignition and my immo off ECU saying immo active
Post by: HelperD on April 06, 2018, 09:21:11 PM
Immo may be off in the ecu however the pairing between the cluster and the key is now different hence why the immo is active. What car are you dealing with? I am imagining 2006 and newer?

Christian


Title: Re: Replaced ignition and my immo off ECU saying immo active
Post by: birchbark506 on April 07, 2018, 04:45:11 AM
It's a 2006 vw Jetta 2.0 tfsi I just swapped the chip part of the key fob in to the new key and car is now running. So the key and cluster have to match no matter what even with immo off ecu


Title: Re: Replaced ignition and my immo off ECU saying immo active
Post by: HelperD on April 07, 2018, 08:41:07 AM
To my knowledge the immo system extends past the ecu in your car.  Where, even if the ecu is defeated there will still be a road block if the cluster and key don't match each other.


Title: Re: Replaced ignition and my immo off ECU saying immo active
Post by: birchbark506 on April 07, 2018, 09:42:09 AM
i do understand that, my car is now running after i swapped the immo chip in the key, must be away to immo off the cluster as well BDM?