NefMoto

Technical => Flashing and Chipping => Topic started by: vanrhj on May 18, 2018, 02:27:31 AM



Title: Fash new file to vw mk5 gti 2.0fsi and now no communication to ECU
Post by: vanrhj on May 18, 2018, 02:27:31 AM
Hi All
In need of any info that can assist me.
I flashed my mk5 gti 2.0 fsi with a stage 2 file via OBD port. The flash did not complete because there was an communication error during the flash.
I tried to flash the file again but without any success. Now I do not have any communication to the ECU.
Can anyone assist me please?


Title: Re: Fash new file to vw mk5 gti 2.0fsi and now no communication to ECU
Post by: birchbark506 on May 18, 2018, 02:44:56 AM
You will most likely need to recover via bdm reader. Did you cross flash or was it your ori file tuned to stage2


Title: Re: Fash new file to vw mk5 gti 2.0fsi and now no communication to ECU
Post by: vanrhj on May 18, 2018, 02:48:06 AM
 It was my original file.
I had a base file from eurodyne that I have also tried but no luck.


Title: Re: Fash new file to vw mk5 gti 2.0fsi and now no communication to ECU
Post by: vanrhj on May 18, 2018, 03:22:50 AM
Can it be a CANBUS issue?