|
Title: Bricked after putting lc & nls, writed succesfully, hopes for checking my file Post by: ziebowski on June 13, 2018, 06:43:20 AM Readed normally the ecu with nefmoto, run the autoscript for the .bin to put the lc & nls, then corrected the checksums, writed succesfully to my ecu, now the car won't start. If there is anyone who can check the file, maybe tell me what I need to correct. Please guys i believe in you
Title: Re: Bricked after putting lc & nls, writed succesfully, hopes for checking my file Post by: nyet on June 13, 2018, 10:35:55 AM The autoscript should not be used by anyone who doesn't know ASM
It can result in very bad files. The results need to be checked by hand. Title: Re: Bricked after putting lc & nls, writed succesfully, hopes for checking my file Post by: ziebowski on June 13, 2018, 11:14:42 AM So know i have non accesible ecu from the nefmoto boot mode with 24 pin :(
Title: Re: Bricked after putting lc & nls, writed succesfully, hopes for checking my file Post by: prj on June 13, 2018, 11:16:58 AM Well you learned the hard way that flashing random code changes without boot mode backup is a really bad idea.
Flash it to stock in boot. Nefmoto flasher doesn't support it. Title: Re: Bricked after putting lc & nls, writed succesfully, hopes for checking my file Post by: ziebowski on June 13, 2018, 11:44:43 AM Thanks for fast answer, can you prefer a program to flash it? I have red that I need Galletto, but there is no way I can have it right now, can I use normal ebay KKL cable?
|