|
Title: MED9.1 - Dsg and Launch control, after released the brakes, car don't run Post by: Khendal on July 11, 2018, 03:22:37 AM Hello, does anyone of you have found this problem in a med9.1 dsg car?
For example: - Setted launch in dsg 5500rpm - Added LC code in ecu 5500rpm - Car Launch work at 5500rpm - Release the brake - Car don't start the run... What should be the problem? i ear something about a dsg setting... is there something else to do? Regards Title: Re: MED9.1 - Dsg and Launch control, after released the brakes, car don't run Post by: gt-innovation on July 11, 2018, 12:46:36 PM First of all you have to tell us what lc code you are using and what is it doing.
Next thing is to raise the lc from the dsg higher then your code 600+ rpm. So why do you run your lc at 5500? if your lc works good 4000 to 4500 would be perfect even for glue with any kind of turbocharger. the reason that your car is not moving is the dsg.... Title: Re: MED9.1 - Dsg and Launch control, after released the brakes, car don't run Post by: Khendal on July 11, 2018, 02:26:26 PM ... Thanks as always, what i though! ;) the reason that your car is not moving is the dsg.... ... now I have to find out why and which map does not let the car move ??? See you next year ;D :D Title: Re: MED9.1 - Dsg and Launch control, after released the brakes, car don't run Post by: gt-innovation on July 11, 2018, 02:43:57 PM lower your lc from ecu and car will start....the algo you mentioned is just for show off...
Title: Re: MED9.1 - Dsg and Launch control, after released the brakes, car don't run Post by: teobolo on July 12, 2018, 11:28:24 PM i usually use 300-400rpm lower for LC in engine ecu than the tcu and the car starts perfect ...But it needs some testing....
|