NefMoto

DO NOT POST "PLZ ADD LC TO MY FILE" REQUESTS HERE

They will be deleted.

This is a DIY site.

http://nefariousmotorsports.com/forum/index.php?topic=12559.0title=

I just resisted the urge to post a nonsense bin with LC request here, but you better believe I thought about it real hard.

Shitebag if ye dinnae.

So I was able to enable LC but for some reason when I drive the car my rpm gose to what I have my LC set to switch is 4200 while stationary and have it set to resume 7000 rpm after 2.5km speed, is there something I am missing?

Da fuq?  :)

what is that in English haha

Translation = Need more details.  :P

Will give more details later on but I was able to get LC working at 4200 rpm and then resume the 7000 rpm after 2.5km of driving. I had 2 1x1 maps wrong

i had to set nmax back to 7000 i had it set to 4200
LC ITNMXH  to 0  and now i have 4200 when stationary and resume 7000 rpm over 2.5km wheel speed
i did add the org file and the kp for launch control.

oh no.. it appears the normys (and/or vwvortex BROs) have managed to infiltrate our covet..  ::)   :D

hi! first ,dont judge me,i`m newbie !after i sow some threads here i wanted to make my 1,8t me7,5 launch control,bangs etc !please corect me where i go wrong!
after i readed http://www.nefariousmotorsports.com/wiki/index.php/Adding_anti-lag_launch_control_and_no-lift_shift and http://nefariousmotorsports.com/forum/index.php?topic=607.0 i started to do it myself ! i opened my file in winols ,search for the first things in this topics (FTOMN)
searched his adress(0001a340h) and the nubers from the topic not meeting the numbers from my ecu file never(have a 06a906032de from leon ecu file but i tried with a passat and a bam ones still dont meeting the numbers) not just for FTOMN,for all the map adress described there\
please make me undestend what i.m doing wrong
thank you

Did you make any assembly changes?

first i didnt nothing and 2nd what is assembly changes
thank you a lot

and i tried with ori.files ,3,and same shit...

What do you think "0x8E800 to 0x8E88D: Replace the empty space with the new routine" means?

http://nefariousmotorsports.com/forum/index.php?topic=15255

SW360165 - FTOMN : 1A2DB

i thinked at that directory need to be an empy space (ff ff ff ff,ori 000000,i dont know yet)but for all4 ecu files there is another codes ,like in the image atached,please dont be rude,i just want to understand where i.m wrong

thank you ,but here is another question,the code is like in the topics, 00 in that case,but when i open the map ith the kp,the result is 12,500

How do you know what each block of code for each ECU should be?

i do “search adeess “ i type the adress from the topic ,but at mine adress i have another codes , like in the photo atached

And that tells you if
works for your ecu or not? Interesting. Are you sure about that?

evening all, i have a issue with my skoda for some reason the launch seems to work and cut ok but now for a reason since doing this it seems to loose al power around 5000rpm when hot?

Well what did you change?

What do your ASM changes do?

hi i have attached my ori file i think i have put the codes in right

Did you write them yourself or did you copy/paste them from somewhere?

hello could you help me to activate it by putting the mod file?

Dude, seriously?

I'm trying to activate a file someone can tell me if I'm on the right track?

ecco i file

it is a bosch me 7.4.5

So you decided to post in the MED9.1 thread.

Fuck that, I'm merging them all together into one mess of stupid.

sorry I could not find a suitable discussion you can help me

Read this whole thread before posting again. From page 1.

I already read can you help me?

No.

What would you like to know? Be specific.

if the procedure to activate the launch control is correct in my files

List the code you changed and walk us through each change.

I posted 3 files on page 2 I changed
VNMX
ITNMXH
NMAX
NMAXOG
TMOTNMX
TNMXH
CWNMAXMD
I also put a winch map, I'd like to know if I'm on the right track

That is not code. Those are maps. Which ASM code did you change and/or write?

Please dump the disassembly and describe each line.

can you explain how to do it? I do not know how to do it

The steps are:

Learn C16 assembly code
Learn how to use IDA
Learn how to compile custom code

More here, read all of it:

http://nefariousmotorsports.com/forum/index.php?topic=12559.0title=

If its any consolation, after a few months of reading on this forum daily, you will understand. I found that you can use the automated script posted here, and it works just as well, but you need to understand what you are doing. If you follow blindly you will go wrong, stop your ECU from functioning and get the death bit, etc.

You can always boot mode the original file back on. trial and error. If you followed Nyet's writeup on the https://s4wiki.com/wiki/Tuning#Flashing_utilities

You should be fine. do you have a bootmode cable already or is that why your hesitant to just flash it with your changes. The numbers should be "exactly" what Nyet has in his post or your mapping it wrong, hence you will have to disassemble the code which is easy if you use IDA a lot... otherwise its basically another month of trial and error.

Hello,
 I was read a lot of about script from edduu and others and when i try to download script from edduu i saw the blank gitthub from this user ;/

So i decided to create new post with one question, where i can find the lastest version of 2stepscript for me 7.5 ?