|
Title: Change axis in TunerPro Post by: mushtafa on August 09, 2018, 11:52:42 PM Probably real simple, but can't find a way!
I want to change the values of an axis of a table in TunerPro. I can edit the .xdf and give it the values I want, but it only changes the .xdf, not the .bin. I've had a search online, but still not sure. Can anyone help, or share a tutorial/FAQ which explains how to do it? Cheers Title: Re: Change axis in TunerPro Post by: SB_GLI on August 10, 2018, 05:35:42 AM In tunerpro, you can't edit a map's axis. You have to define that axis in a map and then you can edit. This was the one thing about tunerpro that I absolutely hated.
Title: Re: Change axis in TunerPro Post by: mushtafa on August 10, 2018, 10:32:19 AM OK, not 100% sure what you mean, but gives me a bit more of a direction to look.
Perhaps it'll be easier to add the location to the .KP file in Winols? I did look into this as well, but I haven't been able to suss that out either. Title: Re: Change axis in TunerPro Post by: nyet on August 10, 2018, 12:39:09 PM He means you have to make a seperate 1d map for the axis itself.
Title: Re: Change axis in TunerPro Post by: mushtafa on August 10, 2018, 12:57:39 PM OK, I've no idea how to do that, but I'll do some reading!
Title: Re: Change axis in TunerPro Post by: KasperH on August 11, 2018, 12:13:39 AM OK, I've no idea how to do that, but I'll do some reading! Just like you would define any map, you're just defining the axis data in a 1d map. |