NefMoto

Technical => Flashing and Chipping => Topic started by: vwnut8392 on November 18, 2018, 06:48:33 PM



Title: "required time delay not expired" problem
Post by: vwnut8392 on November 18, 2018, 06:48:33 PM
tried to flash an MED9 ECU today and MPPS reported "required time delay not expired". i could however bench flash it with BDM. is there a way to get rid of this completely? its obviously not in the flash side because after loading a different flash with BMD i still got the same result so it has me thinking this counter/timer is in the eeprom. anyone here shed some light on this because its freaking annoying to have to BDM the car all the time.


Title: Re: "required time delay not expired" problem
Post by: gman86 on November 18, 2018, 08:28:26 PM
tried to flash an MED9 ECU today and MPPS reported "required time delay not expired". i could however bench flash it with BDM. is there a way to get rid of this completely? its obviously not in the flash side because after loading a different flash with BMD i still got the same result so it has me thinking this counter/timer is in the eeprom. anyone here shed some light on this because its freaking annoying to have to BDM the car all the time.

Leave ignition on for ~15mins and retry.


Title: Re: "required time delay not expired" problem
Post by: SB_GLI on November 19, 2018, 08:39:33 AM
some tool that you have is not properly passing security access and it's locking you out.