NefMoto

Technical => Flashing and Chipping => Topic started by: seanf on November 25, 2018, 05:31:11 PM



Title: Can't write 95040 to ecu
Post by: seanf on November 25, 2018, 05:31:11 PM
I keep getting a chip select error and I'm not sure how to determine the correct one to manually enter it, this ecu has given me grief since I started, k commander didn't want to pull the SKC so I ended up pulling the BIN with me7eeprom, used vag eeprom to edit it and save it and trying to flashing it with me7eeprom I get a chip select error.

ECU is 4b0907551t from 2001 A6 2.7T, Trying to turn the immo off so I can put an S4 m box file on it to run with my 2004 A4 2.7t swap.

Thanks