|
Title: Bosch 5.9.2 ecu how to read skf and preferably how to disable immo entirely Post by: Chz on March 22, 2019, 07:43:54 PM The vehicle is a 01 vw cabrio. My wife lost her transponder key. We have a key with no transponder that turns the car on for 1 second. Ive got a kkl 409.1 cable and I do have the ability and deaire to remove the ecu if necessary. Willing to try any option except give vw money. Located in san antonio.
Title: Re: Bosch 5.9.2 ecu how to read skf and preferably how to disable immo entirely Post by: Chz on March 22, 2019, 07:44:55 PM Whoops. Typo in the title. Meant how to read skc.
Title: Re: Bosch 5.9.2 ecu how to read skf and preferably how to disable immo entirely Post by: _nameless on March 23, 2019, 04:35:04 AM The only way to immo off this ecu is lift the Eeprom chip and dump with a chip burner, edit and reburn / resolder. You can't do it wit a cheap clone vag cable. It's a flea chip 24c02. Good luck
Title: Re: Bosch 5.9.2 ecu how to read skf and preferably how to disable immo entirely Post by: Chz on March 23, 2019, 07:17:17 AM Dang. Well is it possible to do the operation without desoldering but with using a 8 pin test clip? Any recommendations for an inexpensive chip reader/flasher? Otherwise any recommendations for a us based electrical genius who wont bend me over to get this done??
Thanks I really appreciate your response. Title: Re: Bosch 5.9.2 ecu how to read skf and preferably how to disable immo entirely Post by: _nameless on March 23, 2019, 12:10:56 PM Dang. Well is it possible to do the operation without desoldering but with using a 8 pin test clip? Any recommendations for an inexpensive chip reader/flasher? Otherwise any recommendations for a us based electrical genius who wont bend me over to get this done?? It won't work Because it's in circuit. You need you lift it. Thanks I really appreciate your response. Title: Re: Bosch 5.9.2 ecu how to read skf and preferably how to disable immo entirely Post by: Chz on March 23, 2019, 01:36:31 PM Again thank you for the reply. Thats likely above my skill level im afraid of toasting the ecu by soldering incompetently. Can I swap the immo module 6x0953257 with a different one that I buy with known good keys? Or would anyone delete immo if I ship them my module and pay??
Title: Re: Bosch 5.9.2 ecu how to read skf and preferably how to disable immo entirely Post by: _nameless on March 23, 2019, 03:13:50 PM Again thank you for the reply. Thats likely above my skill level im afraid of toasting the ecu by soldering incompetently. Can I swap the immo module 6x0953257 with a different one that I buy with known good keys? Or would anyone delete immo if I ship them my module and pay?? I believe I have another m5.92 ecu I'll check when I get home if so I can immo off it for you and ship. The cabby has the aba with the dizzy still right?Title: Re: Bosch 5.9.2 ecu how to read skf and preferably how to disable immo entirely Post by: Chz on March 23, 2019, 06:42:24 PM Yes its got the aba and the dizzy its a manual trans
Title: Re: Bosch 5.9.2 ecu how to read skf and preferably how to disable immo entirely Post by: Chz on March 23, 2019, 06:50:58 PM vagcom says
037906018c Component 2.0l r4/2v motr hs v02 Soft coding 00001 Shop # wsc 00066 And for immobilizer 6x0953257 Component immo 0007 Soft coding 00001 Shop # wsc 25072 Extra : xxxxxxxxxxxxxxxxx vwz1z0y07189459 Title: Re: Bosch 5.9.2 ecu how to read skf and preferably how to disable immo entirely Post by: eliotroyano on March 23, 2019, 06:58:52 PM I have test some M592 ECUs that it E2P can be read but not write ICSP. M38x nope at all. Best bet is to take it out board for proper operation.
Title: Re: Bosch 5.9.2 ecu how to read skf and preferably how to disable immo entirely Post by: Chz on March 24, 2019, 07:03:43 AM So elio I did some googling to better understand you I didnt understand the acronyms. Do you mean incircuit I could read eeprom data but I can not flash it? Would that mean I could retrieve my skc incircuit?
Title: Re: Bosch 5.9.2 ecu how to read skf and preferably how to disable immo entirely Post by: eliotroyano on March 24, 2019, 07:02:50 PM So elio I did some googling to better understand you I didnt understand the acronyms. Do you mean incircuit I could read eeprom data but I can not flash it? Would that mean I could retrieve my skc incircuit? Yes but just to clarify I have been lucky with some ECUs. Others no. |