NefMoto

Technical => Reverse Engineering => Topic started by: Freddwood on March 27, 2019, 07:55:31 AM



Title: How to disable oil level sensor on 1.8t ANB
Post by: Freddwood on March 27, 2019, 07:55:31 AM
I recently swapped my 1.8T AJL harness with an ANB Harnessd and ecu to be able to flash in the car.
AJL engine had no oil level sensor so theres no place for then anb sensor.
Until I change the oil pan I want to get rid of the error in my fis display, because it blocks everything else while driving.

Can anyone hint me to what I have to disable?


Title: Re: How to disable oil level sensor on 1.8t ANB
Post by: BlackT on March 27, 2019, 09:30:41 AM
You must disable it in cluster


Title: Re: How to disable oil level sensor on 1.8t ANB
Post by: SQT on March 28, 2019, 03:28:03 AM
I recently swapped my 1.8T AJL harness with an ANB Harnessd and ecu to be able to flash in the car.
AJL engine had no oil level sensor so theres no place for then anb sensor.
Until I change the oil pan I want to get rid of the error in my fis display, because it blocks everything else while driving.

Can anyone hint me to what I have to disable?

What is your dashboard?
You must disable it in cluster
I would also like to know how to do this, for general self-development.


Title: Re: How to disable oil level sensor on 1.8t ANB
Post by: BlackT on March 28, 2019, 04:18:05 AM
I don't know yet, didn't try. But I wil go simple, put ressistors on dashboard pin, where cluster gets signal from oil sensor


Title: Re: How to disable oil level sensor on 1.8t ANB
Post by: Freddwood on March 28, 2019, 06:14:57 AM
Looked some more into it and decided it probably is faster to actually change to the proper oil pan with sensor cut out instead of messing around with the electric side of things  ;D


Title: Re: How to disable oil level sensor on 1.8t ANB
Post by: fknbrkn on March 28, 2019, 10:31:57 AM
iirc its in cluster coding - oil service intervals


Title: Re: How to disable oil level sensor on 1.8t ANB
Post by: BlackT on March 28, 2019, 11:06:10 AM
iirc its in cluster coding - oil service intervals
Can you explain little more precise? I was searching on net but didn't find anything useful


Title: Re: How to disable oil level sensor on 1.8t ANB
Post by: fknbrkn on March 28, 2019, 11:46:13 AM
p/n: 8E0-920-9??-??
adaptations in this case

A038,0,Oil Minimum Detection
A038,5,Oil Minimum Detection
A038,6,With this function the oil-minimum-warning at
A038,7,low oil level can be deactivated or activated.
A038,8,0 - Oil Minimum Detection not activated
A038,9,1 - Oil Minimum Detection activated
A038,10,
A038,11,NOTE: Perform Security Access with "13861" first.
;
A039,0,Oil Level Sensor Adaptation
A039,5,Oil Level Sensor Adaptation
A039,6,Determines if the TOG Sensor is installed or not.
A039,7,0 - TOG Evaluation from the Instrument Cluster not activated
A039,8,1 - TOG Evaluation from the Instrument Cluster activated
A039,9,
A039,10,NOTE: Perform Security Access with "13861" first.


Title: Re: How to disable oil level sensor on 1.8t ANB
Post by: BlackT on March 28, 2019, 01:24:40 PM
p/n: 8E0-920-9??-??
adaptations in this case

A038,0,Oil Minimum Detection
A038,5,Oil Minimum Detection
A038,6,With this function the oil-minimum-warning at
A038,7,low oil level can be deactivated or activated.
A038,8,0 - Oil Minimum Detection not activated
A038,9,1 - Oil Minimum Detection activated
A038,10,
A038,11,NOTE: Perform Security Access with "13861" first.
;
A039,0,Oil Level Sensor Adaptation
A039,5,Oil Level Sensor Adaptation
A039,6,Determines if the TOG Sensor is installed or not.
A039,7,0 - TOG Evaluation from the Instrument Cluster not activated
A039,8,1 - TOG Evaluation from the Instrument Cluster activated
A039,9,
A039,10,NOTE: Perform Security Access with "13861" first.
Something doesn't work
https://youtu.be/VRK4L9P1CgY


Title: Re: How to disable oil level sensor on 1.8t ANB
Post by: fknbrkn on March 28, 2019, 02:34:08 PM
Maybe its because of different vehicle?  ::)
Check coding yay


Title: Re: How to disable oil level sensor on 1.8t ANB
Post by: SQT on March 28, 2019, 10:34:49 PM
p/n: 8E0-920-9??-??
adaptations in this case

A038,0,Oil Minimum Detection
A038,5,Oil Minimum Detection
A038,6,With this function the oil-minimum-warning at
A038,7,low oil level can be deactivated or activated.
A038,8,0 - Oil Minimum Detection not activated
A038,9,1 - Oil Minimum Detection activated
A038,10,
A038,11,NOTE: Perform Security Access with "13861" first.
;
A039,0,Oil Level Sensor Adaptation
A039,5,Oil Level Sensor Adaptation
A039,6,Determines if the TOG Sensor is installed or not.
A039,7,0 - TOG Evaluation from the Instrument Cluster not activated
A039,8,1 - TOG Evaluation from the Instrument Cluster activated
A039,9,
A039,10,NOTE: Perform Security Access with "13861" first.
fukenbroken the Allroad dashboard and 8e use frequency modulation, because it will still show an error. Or I'm wrong? today I will try on allroad


Title: Re: How to disable oil level sensor on 1.8t ANB
Post by: SQT on March 28, 2019, 10:39:40 PM
Looked some more into it and decided it probably is faster to actually change to the proper oil pan with sensor cut out instead of messing around with the electric side of things  ;D
but it will be too easy, not interesting)))


Title: Re: How to disable oil level sensor on 1.8t ANB
Post by: BlackT on March 28, 2019, 11:49:21 PM
Maybe its because of different vehicle?  ::)
Check coding yay
is it possible to disable it on this MM TT cluster?


Title: Re: How to disable oil level sensor on 1.8t ANB
Post by: Freddwood on April 21, 2019, 04:46:21 AM
I tried disabling it via adaption in vcds but there isnĀ“t even a line which says oil level sensor.


Title: Re: How to disable oil level sensor on 1.8t ANB
Post by: macxxx on April 21, 2019, 07:05:50 AM
Is it a vdo or mm jeager? I can disable it in vdo