NefMoto

Technical => Data Logging => Topic started by: Bugman100 on May 14, 2019, 10:14:46 AM



Title: visualme7logger problem - log file issue
Post by: Bugman100 on May 14, 2019, 10:14:46 AM
i have managed to install visual me7 logger, but had to use a command prompt to generate the ecu file, not the best but it works.

Now i can see a bunch of varibles to log

Ive selected a couple and gone to log and the same error messages comes up about not finding the file ( same fault as generating the ecu file).

Ive tried running visual me7 from the command prompt with no joy.

how do i overcome this?

Thanks in advance

Nigel



Title: Re: visualme7logger problem - log file issue
Post by: nyet on May 14, 2019, 10:22:39 AM
You're going to have to at least copy/paste the error you're seeing or a screen shot.

Please don't just take a bad smartphone photo of your screen.

Also, have you looked at this?

https://github.com/sbloom82/VisualME7Logger/issues/2

Or read the text in red here?

http://nefariousmotorsports.com/forum/index.php?topic=4830.msg47392#msg47392


Title: Re: visualme7logger problem - log file issue
Post by: Bugman100 on May 14, 2019, 10:34:49 AM
Ok thanks for the advice, here are the screenshots.


Title: Re: visualme7logger problem - log file issue
Post by: nyet on May 14, 2019, 10:38:47 AM
Did you move files out of the bin directory? If so, why? ME7Info.exe and ME7Logger.exe should be in bin.


Title: Re: visualme7logger problem - log file issue
Post by: Bugman100 on May 14, 2019, 10:55:06 AM
i had moved them to make using cmd prompt easier. Ive put them back and now i don't get an error. lesson learnt don't frig with the file structure!

The programme opens a window and reports unable to open port. I will figure this one out on my own has to be incorrect settings for me cable.

Thanks for the help