|
Title: memory layout Post by: Kingdubber on March 05, 2012, 04:58:37 AM Hi Guys,
Could you help me out. I can get nefmoto to connect to my car and read the ecu. Takes seconds though? But I dont know how to/what to select for memory layout. Seems it wants a .xls file? Title: Re: memory layout Post by: Kingdubber on March 05, 2012, 05:16:22 AM 06A906032HK
Audi 2002 European A3 1.8T ME7 AM29F800 I understand I need the '800' memory layout. But where do I find that to load into the nefmoto software? Title: Re: memory layout Post by: pvl on March 19, 2012, 12:18:45 PM To be sure what kind of memory lay-out is used, i usually try to firstly see if i can get hold of a already readed-out file the specific ecu.
if it's a 1meg file, you have a 800-layout if it's a 512kb file, you have a 400-layout. Another way to approach : choose for 800-layout, and try to readout. If succeed, and it is a 400, some hex-editing can be applied to cut-off the excessive 512kb. Or do a re-read in 400-layout mode, afterwards. Go try it out ;) Cheers, PvL |