NefMoto

Classifieds => Wanted => Topic started by: engine_nerd on June 12, 2019, 02:21:56 PM


Title: Hiring: ECU Calibrator
Post by: engine_nerd on June 12, 2019, 02:21:56 PM
Hi Guys,

We're hiring an ECU Calibrator. Open to various levels of Bosch / Siemens experience, but you must have a solid foundation in tuning for power, MBT, reasonable / safe calibration and so forth.

Based in SLC, UT.

Work directly with ECU calibration tools, to develop and test engine and transmission calibrations. Measure results quantitatively using Dynamometer and actual acceleration results. Occasionally travel to sea level for testing or racing trips for product development and marketing.

  • Safely calibrate engines to create maximum horsepower
  • Calibrate engines to operate successfully in a variety of atmospheric conditions
  • Calibrate transmissions for better driveability and user experience
  • Work with transmissions to improve torque holding capabilities
  • Move existing calibrations to alternate versions of OE binaries using WinOLS or similar hex editing software
  • Troubleshoot and reverse engineer OEM calculations and routines which must be modified to eliminate trouble points
  • Read and comprehend complex technical documentation

Details / Apply here: 

https://www.indeed.com/job/ecu-tunercalibration-engineer-ee6a4617008cc365

Title: Re: Hiring: ECU Calibrator
Post by: IamwhoIam on June 12, 2019, 02:48:05 PM
Good luck with that

Title: Re: Hiring: ECU Calibrator
Post by: prj on June 13, 2019, 01:23:52 AM
I think your salary number is at least 2x too low for that.

Title: Re: Hiring: ECU Calibrator
Post by: nyet on June 13, 2019, 08:59:04 AM
Quote from: prj on June 13, 2019, 01:23:52 AM
I think your salary number is at least 2x too low for that.

Agreed.


Powered by SMF 1.1.21 | SMF © 2015, Simple Machines