NefMoto

Technical => Tuning => Topic started by: amd is the best on July 10, 2019, 05:55:06 PM



Title: ESKONF runner flap delete (KFSU)
Post by: amd is the best on July 10, 2019, 05:55:06 PM
Can someone assist with the location in ESKONF where I would delete the runner flap solenoid?

Also, what would the codeword be?

ME7.1 2.8 30v ecu by the way.


Title: Re: ESKONF runner flap delete (KFSU)
Post by: Blazius on July 10, 2019, 06:39:55 PM
Can someone assist with the location in ESKONF where I would delete the runner flap solenoid?

Also, what would the codeword be?

ME7.1 2.8 30v ecu by the way.

Its the N75 driver, to my surprise aswell. IN theory you could also it use as a control valve on FI conversion.


Title: Re: ESKONF runner flap delete (KFSU)
Post by: amd is the best on July 11, 2019, 09:01:12 AM
That's what I thought and I derped a bit. Turns out my binary has four ESKONF's and I wasn't changing the correct one. I changed them all to what I needed and it's good to go now!

Thank you!

Anyone know why there are more then one ESKONF sections on some binaries?


Title: Re: ESKONF runner flap delete (KFSU)
Post by: nyet on July 11, 2019, 09:04:17 AM
That's what I thought and I derped a bit. Turns out my binary has four ESKONF's and I wasn't changing the correct one. I changed them all to what I needed and it's good to go now!

Thank you!

Anyone know why there are more then one ESKONF sections on some binaries?

diff ESKONF for diff ECU coding, same with all maps that have variants


Title: Re: ESKONF runner flap delete (KFSU)
Post by: Blazius on July 11, 2019, 09:04:29 AM
That's what I thought and I derped a bit. Turns out my binary has four ESKONF's and I wasn't changing the correct one. I changed them all to what I needed and it's good to go now!

Thank you!

Anyone know why there are more then one ESKONF sections on some binaries?

haha, nice , its probably the same story as with 0_1_a etc maps. They might be setup for the same car but in different versions. FWD,Quattro, Manual and auto. Could be wrong though.


Title: Re: ESKONF runner flap delete (KFSU)
Post by: gremlin on July 11, 2019, 09:49:25 AM
Can someone assist with the location in ESKONF where I would delete the runner flap solenoid?
ME7.1 2.8 30v ecu by the way.

Try to change in ESKONF.5 byte two low significant bits to 11
xxxxxx11