NefMoto

Technical => Flashing and Chipping => Topic started by: ulek3pl on August 26, 2019, 01:07:43 PM



Title: 16985 - Internal control module memory - checksum error) in VAG 1.8T with ME7.5?
Post by: ulek3pl on August 26, 2019, 01:07:43 PM
Hello! I get car with germany "stage1" mtm. Car runs like crap. I read flash with mpps (i cant with nefmoto cause memory layout), but i cant write. I remove ecu from engine bay and i see this have crypt adapter. I desolder this adapter and solder flash (29f800at). I think it must be 29f800bb. I flash ori file but car have 16985 - Internal control module memory - checksum error). I tried galletto and mpps. I tried checksum with me7check and with Winols. Same result... Any ideas?


Title: Re: 16985 - Internal control module memory - checksum error) in VAG 1.8T with ME7.5?
Post by: aef on August 26, 2019, 11:19:48 PM
check your "ori" file with me7check
try with another eeprom


Title: Re: 16985 - Internal control module memory - checksum error) in VAG 1.8T with ME7.5?
Post by: ulek3pl on August 29, 2019, 02:11:35 AM
Check sum is ok, i check it with nefmoto check before write. Tune file without adapter too have error, with adapter is no dtc..


Title: Re: 16985 - Internal control module memory - checksum error) in VAG 1.8T with ME7.5?
Post by: nyet on August 29, 2019, 07:18:55 AM
Post ori.

There is no "nefmoto check"


Title: Re: 16985 - Internal control module memory - checksum error) in VAG 1.8T with ME7.5?
Post by: ulek3pl on August 30, 2019, 11:55:50 PM
solved, i change 29f800ta to ori 29f800bb.