NefMoto

Technical => Flashing and Chipping => Topic started by: MichVu on September 13, 2019, 02:27:10 AM



Title: 1.8t aum me7.5 flash compatibility
Post by: MichVu on September 13, 2019, 02:27:10 AM
Hello guys so id like to increas at start my 150hp engine to 180hp before actual remaping for stage 2
The question is witch auq flash will be compatible with mine and none of problems will ocure like immo etc. (Iff immo problem will ocure do i have to addapt it wih vcds ?)
Bosh hardware number:0261206887
Bosh software number:1037360272
Vw software number:06A906032DR 0003
Thanks in advance ;)


Title: Re: 1.8t aum me7.5 flash compatibility
Post by: adam- on September 13, 2019, 07:35:37 AM
There was a thread for this yesterday.  Your answer is no.


Title: Re: 1.8t aum me7.5 flash compatibility
Post by: sonique on September 13, 2019, 08:05:13 AM
Hello guys so id like to increas at start my 150hp engine to 180hp before actual remaping for stage 2
The question is witch auq flash will be compatible with mine and none of problems will ocure like immo etc. (Iff immo problem will ocure do i have to addapt it wih vcds ?)
Bosh hardware number:0261206887
Bosh software number:1037360272
Vw software number:06A906032DR 0003
Thanks in advance ;)

no any problem flash auq binary just need correct one