NefMoto

Technical => Data Logging => Topic started by: MarekTM on November 21, 2019, 02:14:03 PM



Title: TP2.0 with OBDLink MX+
Post by: MarekTM on November 21, 2019, 02:14:03 PM
I am trying to connect to ECU EDC16U1 on a bench using CAN, I set up the protocol with AT PB C001 and AT SP B but when I send a channel configuration request message, I receve NO DATA. It is interesting because I can sniff VCDS using the AT MA command and i see requests and responses. There is no problem when I use ISO 14230-4 KWP (fast initialization), AT SH 8010F1 and reading blocks 2101 etc. works fine. What am i doing wrong? Please help me.