|
Title: break bleed nipples for Audi TT MK1 Post by: jochen_145 on December 24, 2019, 03:50:19 AM I want to replace the bleed nipples on my brakes.
For the FWD Audi TT with 314mm breaks, Audi provides the 1K0 615 273 A nipple on the VA. This is an M10x1 nipple with 29mm length. At the RA, the nipple 4D0 615 273 was chosen, which has since been replaced by the 1K0 615 273 C. Both nipples at Audi cost € 7.20/unit in Germany. Now I found quite complicated alternatives on the Internet that are significantly cheaper. However, the same nipples seem to be used for VA and RA .. Can anyone confirm or disprove that this is the case and that the OEM 1K0 615 273 A and 1K0 615 273 C are ultimately the same valves? Thanks for advice Jochen Title: Re: break bleed nipples for Audi TT MK1 Post by: adam- on December 24, 2019, 11:57:13 AM What does EKTA say? Pitch for VAG is always M10x1. Length is usually 29mm too. Just grab some online.
Title: Re: break bleed nipples for Audi TT MK1 Post by: Blazius on December 24, 2019, 12:46:49 PM look for 447615273 or 1K0 615 273 A literally doesnt matter
M10x1 ,29/30+mm , costs like 2 bucks max, do not pay 8 euros for a bleeder valve. |