NefMoto

Technical => Flashing and Chipping => Topic started by: kacperoooni on January 02, 2020, 03:12:45 PM



Title: ME 3.8 Programmer
Post by: kacperoooni on January 02, 2020, 03:12:45 PM
Hi,
What programmers do you use for programming me 3.8.2 flash(eeprom?) memory. I mean the one which contains maps. I know there is 27c1024 inside, what other erasable equivalent can be used instead?


Title: Re: ME 3.8 Programmer
Post by: aleks19411 on February 06, 2020, 01:33:57 PM
Hi,
What programmers do you use for programming me 3.8.2 flash(eeprom?) memory. I mean the one which contains maps. I know there is 27c1024 inside, what other erasable equivalent can be used instead?
yes there is one) in secret to say this is M28F102 in the PLCC44 package


Title: Re: ME 3.8 Programmer
Post by: _nameless on February 06, 2020, 03:54:29 PM
yes there is one) in secret to say this is M28F102 in the PLCC44 package
whats so secret about it? ive posted that info a few times on this forum


Title: Re: ME 3.8 Programmer
Post by: airtite on February 14, 2020, 12:23:48 AM
I was able to do this by bridging to pins on my mpps cable


Title: Re: ME 3.8 Programmer
Post by: prj on February 14, 2020, 01:18:04 AM
I was able to do this by bridging to pins on my mpps cable
Not on a 3.8.2