NefMoto

Technical => Data Logging => Topic started by: Khendal on February 23, 2020, 07:58:11 AM



Title: Genuine VCDS in HID port usb...can't setting in COM for me7logger
Post by: Khendal on February 23, 2020, 07:58:11 AM
Hello, i'm still trying to use my vcds genuine cable to run with me7logger.

Can anyone of you help me? Cable under control panel is in Human Interface Device (Ross-Tech v2 ...)
Can't select com port etc...

Any tips ?


Title: Re: Genuine VCDS in HID port usb...can't setting in COM for me7logger
Post by: fknbrkn on February 23, 2020, 04:26:56 PM
Use usb kkl


Title: Re: Genuine VCDS in HID port usb...can't setting in COM for me7logger
Post by: nyet on February 23, 2020, 07:36:09 PM
From what I can tell the latest gen RossTech cables are not FTDI r232 compatible.


Title: Re: Genuine VCDS in HID port usb...can't setting in COM for me7logger
Post by: Khendal on February 24, 2020, 05:00:29 PM
Use usb kkl

Any cable kkl 409.1 obd2 available in amazon? (fast shipping)


Title: Re: Genuine VCDS in HID port usb...can't setting in COM for me7logger
Post by: aef on February 26, 2020, 05:02:04 AM
just install the vcp mode drivers by ross tech and you will have a virtual com port

its documented in here somewhere


Title: Re: Genuine VCDS in HID port usb...can't setting in COM for me7logger
Post by: nyet on February 26, 2020, 10:09:31 AM
just install the vcp mode drivers by ross tech and you will have a virtual com port

its documented in here somewhere

That hasn't always worked for me on recent cables YMMV


Title: Re: Genuine VCDS in HID port usb...can't setting in COM for me7logger
Post by: dilly on April 09, 2020, 06:39:14 PM
That hasn't always worked for me on recent cables YMMV
recent cables it doesn't work reliably if at all. on the hex+usb older (unlimited vin cables) it works fine. even with my Chinese clone one