|
Title: Audi S4 B5, VisualME7Logger can only connect after Unisettings connection Post by: RC200 on February 25, 2020, 02:02:40 AM I can only connect VisualME7Logger after having connected Unisettings one time (read params).
I cannot connect with only IGN on, I need to go through Uniseetings first. Once connected, I can see the values updated in real time, so CFG and ECU file are ok Of course, once connected with VisualME7Logger, if I try to crank it up, the engine dies as this is the normal behavior after Unisettings connection. If I cycle the ignition, the engine starts but unable to connect anymore VisualME7Logger and you cannot go through Unisettings when engine is running .... Chicken and egg .... Error! Exit code:4 =>could not connect to ECU, exiting ... exiting (cause=0x4)... ECU 8D0 907 551D Title: Re: Audi S4 B5, VisualME7Logger can only connect after Unisettings connection Post by: RC200 on February 25, 2020, 07:27:06 AM I succeeded in connecting with IGN ON using SLOW-0x00 aka double init (btw, I can hear the 2 consecutive bips coming from the cluster, as for connection with UniSettings).
BUT as soon as I crank the engine up, more precisely, as soon as I release the startup key, the values freeze (so connection dropped). I tried various speeds without success. Sometimes I got popups like the ones attached. |