Title: Help with IMMO off MED9.1.1 95160 Post by: IVANVXR on April 04, 2020, 11:46:56 AM Hi guys, can someone help me with immo of for ST95160
I would like to pay ECU is MED9.1.1 3.2 FSI I was try two solutions but no positive. I was read full BDM with ORI KTAG Thanks Title: Re: Help with IMMO off MED9.1.1 95160 Post by: elektronik13 on April 13, 2020, 11:11:17 AM Hi guys, can someone help me with immo of for ST95160 immo offI would like to pay ECU is MED9.1.1 3.2 FSI I was try two solutions but no positive. I was read full BDM with ORI KTAG Thanks Title: Re: Help with IMMO off MED9.1.1 95160 Post by: IVANVXR on April 13, 2020, 11:48:44 AM immo off Hello,thanks for helping. I was try same solution from E2PA but don't working Title: Re: Help with IMMO off MED9.1.1 95160 Post by: Hollywood on October 12, 2020, 03:37:45 PM Is this a working method for S5? - unclear if this worked when tested..
Title: Re: Help with IMMO off MED9.1.1 95160 Post by: elektronik13 on October 12, 2020, 04:12:12 PM Hello,thanks for helping. it has to work, you won't get a better solutionI was try same solution from E2PA but don't working Is this a working method for S5? - unclear if this worked when tested.. I think for at least 5 million people worldwide this solution worked but there are many cases where immo off does not work due to poor diagnosis, the problem was not immo Title: Re: Help with IMMO off MED9.1.1 95160 Post by: bamofo on October 21, 2020, 10:28:10 AM Is this a working method for S5? - unclear if this worked when tested.. The S5 EEproms that ive seen are different then the one shared in this thread they have the initial large CSM portions 3 times instead of 2. if you use the E2PA tool it screws up the CSM on it all. Easier to manually turn off the IMMO and recalculate the CSM by hand. |