Title: m5.9 to m7.5 wiring pinout ? Post by: xxx8indxxx on April 04, 2012, 12:47:38 PM m5.9 to m7.5 wiring pinout ? anyone know where to start ? thankyou
Title: Re: m5.9 to m7.5 wiring pinout ? Post by: gremlin on April 04, 2012, 04:17:58 PM m5.9 to m7.5 wiring pinout ? anyone know where to start ? Start to learn about principial differencies beetween these ECUs. Than will be clear that your question is unanswerable... Title: Re: m5.9 to m7.5 wiring pinout ? Post by: xxx8indxxx on April 04, 2012, 04:59:30 PM well i need the pinouts for both ecu's to make adapter harness then i will have to get a few sensors and i plan to use a dbc throttle body i have a wideband oxygen sensors i can get all the sensors i need for free so what i really need is the pinouts and a ecu file with dbc mod and immo delete im lost after that
Title: Re: m5.9 to m7.5 wiring pinout ? Post by: Gonzo on April 05, 2012, 04:00:54 PM Its easier to just get the whole harness. Trust me.
Title: Re: m5.9 to m7.5 wiring pinout ? Post by: xxx8indxxx on April 05, 2012, 06:08:32 PM lol i plan to eliminate almost everything and run the bare minimum
Title: Re: m5.9 to m7.5 wiring pinout ? Post by: Gonzo on April 07, 2012, 09:00:30 AM You can swap an engine harness in about an hour or two.
|