|
Title: ME7 8D0907551D AGB need immo OFF Post by: Jaamboo on September 09, 2020, 11:49:43 AM Hey Guys.
i hope im right here. I have a problem with my swaped s6 c5 with s4 b5 engine. Engine starts for 1 sec then turn off. I think its the immo in the ecu. Setup: 8D0907551D Bosch 0261206382 Eeprom 950403 attached eeprom file in here i hope someone can help me turn immo off Thanks guys have a nice one. Title: Re: ME7 8D0907551D AGB need immo OFF Post by: elektronik13 on September 09, 2020, 12:29:12 PM Hey Guys. i hope im right here. I have a problem with my swaped s6 c5 with s4 b5 engine. Engine starts for 1 sec then turn off. I think its the immo in the ecu. Setup: 8D0907551D Bosch 0261206382 Eeprom 950403 attached eeprom file in here i hope someone can help me turn immo off Thanks guys have a nice one. the eeprom read is corrupted read again Title: Re: ME7 8D0907551D AGB need immo OFF Post by: nyet on September 09, 2020, 01:25:32 PM Convert to M, better defined, no immo.
Title: Re: ME7 8D0907551D AGB need immo OFF Post by: Jaamboo on September 10, 2020, 10:23:27 AM the eeprom read is corrupted read again Hey every read of the file will look the same ... i have a ch341a usb reader(software 1.29 with 25lc160 as selected chip) and reading direkt from ecu via clamps but every time the fin from ecu and immo is in XXX could be a problem with a soldered chip from ABT Tuner ? Hope someone can help me .. ??? Title: Re: ME7 8D0907551D AGB need immo OFF Post by: Audiquattro44 on September 10, 2020, 11:38:35 AM test it
Title: Re: ME7 8D0907551D AGB need immo OFF Post by: Jaamboo on September 11, 2020, 11:45:39 AM the eeprom read is corrupted read again Hey, made some changes in my reading setup would be nice if u can take a look i hope someone can do something with this .. ??? Title: Re: ME7 8D0907551D AGB need immo OFF Post by: elektronik13 on September 11, 2020, 04:04:23 PM Hey, immo offmade some changes in my reading setup would be nice if u can take a look i hope someone can do something with this .. ??? Title: Re: ME7 8D0907551D AGB need immo OFF Post by: Blazius on September 11, 2020, 04:58:28 PM Again, why dont you crossflash/conv to m box which is an US market file , that is very well defined and it has no WFS/immo.
Title: Re: ME7 8D0907551D AGB need immo OFF Post by: Jaamboo on September 12, 2020, 11:41:22 AM immo off Thanks a lot worked perfectly ;DAgain, why dont you crossflash/conv to m box which is an US market file , that is very well defined and it has no WFS/immo. Sorry, but im not that deep into ecu stuff but im willing to learn about it . Can u tell me what do u mean with convert to m box ? ::)Title: Re: ME7 8D0907551D AGB need immo OFF Post by: nyet on September 12, 2020, 11:49:06 AM Can u tell me what do u mean with convert to m box ? ::) It means ditching this: Quote soldered chip from ABT Tuner and doing your own tune Title: Re: ME7 8D0907551D AGB need immo OFF Post by: Jaamboo on September 21, 2020, 12:15:46 PM It means ditching this: and doing your own tune Hey im interested in programming my own tune. You say that i have to ditch the soldered chip ? So i need a new chip that i solder in ? Is there anything that i have to worry about for the chip ? Or should i buy the same that is installed now ? I heard that i can upgrade to an Engine code BES ecu ? Is there any differents between the hardware from the ecus or are there software changes ? With my 551D ecu i cant read misfire counter or even misfire on which zylinder... Sorry for the "dumb" questions but i want to get slowly into tuning and my current setup but here is soo much stuff to read but i think my head will blow up :o if u have some interessting threads that i can read to understand this better give me a link ::) |