NefMoto

Noob Zone => Noob Questions => Topic started by: OberlandRacing on January 02, 2021, 12:59:27 PM



Title: ME 7.X 1.8T Pop and bangs via A/C or Cruise Control
Post by: OberlandRacing on January 02, 2021, 12:59:27 PM
Hello, im completly new to "tuning".
I would like to change the pop and Bangs via Cruise Control.
How du you do it?
I have an A4 B5 1.8T ANB and i would like to do it.

Also the stock File of my B5.
thanks!


Title: Re: Re: ME 7.X 1.8T Pop and bangs via A/C or Cruise Control
Post by: xXxCryxXx on January 02, 2021, 01:19:25 PM
Hello, im completly new to "tuning".
I would like to change the pop and Bangs via Cruise Control.
How du you do it?
I have an A4 B5 1.8T ANB and i would like to do it.

Also the stock File of my B5.
thanks!
Do you have a Damos?

X-Boost Performance



Title: Re: Re: ME 7.X 1.8T Pop and bangs via A/C or Cruise Control
Post by: OberlandRacing on January 02, 2021, 01:30:14 PM
no, just have an XDF, i also missing some Maps and cant find them.
 
CWSAWE
KFZWMN
KFTVSA
KFTVSAKAT




Title: Re: Re: Re: ME 7.X 1.8T Pop and bangs via A/C or Cruise Control
Post by: xXxCryxXx on January 02, 2021, 01:34:48 PM
no, just have an XDF, i also missing some Maps and cant find them.
 
CWSAWE
KFZWMN
KFTVSA
KFTVSAKAT
KFZWMIN is easy to find / define CWSAWE is hard to find its 1 bit

X-Boost Performance



Title: Re: Re: Re: ME 7.X 1.8T Pop and bangs via A/C or Cruise Control
Post by: OberlandRacing on January 02, 2021, 01:45:56 PM
Thanks for your Help!
Can you give me a Tipp?
i dont understand how i can find "KFZWMIN"
you just look at the Hex editor?
Like i said, im new but i would like to learn it.
that would be awesome.
Thanks again.


Title: Re: ME 7.X 1.8T Pop and bangs via A/C or Cruise Control
Post by: xXxCryxXx on January 02, 2021, 01:56:45 PM
I hope that hint is enough

KFZWMIN 1 = 0x12E27 16x12
KFZWMIN 2 = 0x12F64 16x12
Optimum Ignition = 0x15865, 0x15915 16x11 ( two maps )
Basic Ignition Angle = 0x1609A, 0x1615A ( two maps ) 16x12


Title: Re: ME 7.X 1.8T Pop and bangs via A/C or Cruise Control
Post by: xXxCryxXx on January 02, 2021, 01:58:23 PM
btw, Try to learn and remember in 2D View how the ignition maps are looking on Bosch ECU´s its pretty easy ( i think )


Title: Re: ME 7.X 1.8T Pop and bangs via A/C or Cruise Control
Post by: xXxCryxXx on January 02, 2021, 02:09:27 PM
Also the stock File of my B5.
thanks!

Are you sure that is a stock File? Becuse i got the Same File on my PC, and there are many diffrent cchanges inside :)


Title: Re: ME 7.X 1.8T Pop and bangs via A/C or Cruise Control
Post by: OberlandRacing on January 02, 2021, 02:19:50 PM
Its the "stock" from my car. I noticed that it has a Stage 1


Title: Re: ME 7.X 1.8T Pop and bangs via A/C or Cruise Control
Post by: OberlandRacing on January 02, 2021, 04:13:21 PM
Yeah, i found a Damos and i also learnd how to check the Maps in 2D.
But do you know hot to do it with cruise control?


Title: Re: Re: ME 7.X 1.8T Pop and bangs via A/C or Cruise Control
Post by: xXxCryxXx on January 02, 2021, 04:33:46 PM
Yeah, i found a Damos and i also learnd how to check the Maps in 2D.
But do you know hot to do it with cruise control?
no, only a/c Button.. but for this is need also a Damos 

X-Boost Performance



Title: Re: ME 7.X 1.8T Pop and bangs via A/C or Cruise Control
Post by: Sandstorm3k on January 07, 2021, 01:49:13 AM
Yeah, i found a Damos and i also learnd how to check the Maps in 2D.
But do you know hot to do it with cruise control?

You are looking for DNWEK. This value is added to KFNWEGM and thus controls fuelcut. Set to 6000, so fuelcut is always disabled when condition AC-on is met you have your pops and bangs.

(You will still need to retard timing aswell)


Title: Re: ME 7.X 1.8T Pop and bangs via A/C or Cruise Control
Post by: sda2 on January 07, 2021, 07:52:06 AM
If you want to change that to cruise control you have to change the bit that is checked for the map decision.

This is a change in program code and needs to be done in every routine you want to change the look up for.


Title: Re: ME 7.X 1.8T Pop and bangs via A/C or Cruise Control
Post by: bamofo on January 08, 2021, 11:44:32 AM
Yeah, i found a Damos and i also learnd how to check the Maps in 2D.
But do you know hot to do it with cruise control?


You write you logic with Jump command if Cruise is on.

I can take a look at this if you would like. are you just trying to do the LC pop and bang?


Title: Re: ME 7.X 1.8T Pop and bangs via A/C or Cruise Control
Post by: shaker87 on March 12, 2021, 10:32:21 AM
You are looking for DNWEK. This value is added to KFNWEGM and thus controls fuelcut. Set to 6000, so fuelcut is always disabled when condition AC-on is met you have your pops and bangs.

(You will still need to retard timing aswell)

I have the problem on a Seat Leon AUQ. I set DNWEK to the highest RPM (7080rpm) and retard Timing in KFZWMN but it does nothing..... Have i to change any values in KFNWEGM?

The A/C System isn't working, because there is no Gas inside. I tryed some solutions, but nothing is working.


Title: Re: ME 7.X 1.8T Pop and bangs via A/C or Cruise Control
Post by: OberlandRacing on April 08, 2021, 10:32:04 AM
So first guys i wanna thank you for your Answers.
I needed a little bit of time to get comfortable with Tunerpro, Winols etc.

So i managed to do some pops and Bangs with KFZW and KFZWOP.
Can somebody look at my Values? idk if i shoud go in -20. I just tryed -10 (What are good values? , seen -10 on a S4 Tune)
also i´ve heard that the values shoud be the same in KFZW/KFZWOP for the Torque calculation? is this right?
Also shoud i adjust KFZWMIN for normal Pops? or other Values?

Thanks!



Title: Re: ME 7.X 1.8T Pop and bangs via A/C or Cruise Control
Post by: Sandstorm3k on April 08, 2021, 12:15:27 PM
So first guys i wanna thank you for your Answers.
I needed a little bit of time to get comfortable with Tunerpro, Winols etc.

So i managed to do some pops and Bangs with KFZW and KFZWOP.
Can somebody look at my Values? idk if i shoud go in -20. I just tryed -10 (What are good values? , seen -10 on a S4 Tune)
also i´ve heard that the values shoud be the same in KFZW/KFZWOP for the Torque calculation? is this right?
Also shoud i adjust KFZWMIN for normal Pops? or other Values?

Thanks!


When I do pops & bangs these are my changes:

KFZWMN -15 to -35
KFZWOP top 2 rows -0 to -20
KFTVSA 2.5 (set as you wish)
DNWEK 7000
TVSAG0 2.5
TVSABTE 2.5


Title: Re: ME 7.X 1.8T Pop and bangs via A/C or Cruise Control
Post by: OberlandRacing on April 09, 2021, 01:05:56 PM
Tanks for the Example.

Now i have to look for the Adresses of:

KFTVSA
DNWEK
TVSAG0
TVSABTE
CWSAWE

Dont have a full XDF. Also non for a 2.7T so i coud compare via 2D. ( i have the full XDF from the Forum)
maybe someone can help me? or has a XDF for 2.7T so i coud compare?
Thanks!