|
Title: TT Immo - cannot read full eeprom Post by: Byront on March 23, 2021, 11:11:48 PM Hey all
So the first replacement I got was not up to the job, this is the second - but for some reason Vagcommander 2.5 only reads TT Shadow 1 or Shadow 3, if I direct full read, it crashes everytime. Attached are the files, if the SKC is in any of them it would be awesome - else I'm stumped. Title: Re: TT Immo - cannot read full eeprom Post by: stuydub on March 24, 2021, 02:17:11 AM Try reading ECU for SKC use pattern 11 in VKC 2.5
Title: Re: TT Immo - cannot read full eeprom Post by: Byront on March 24, 2021, 12:11:09 PM Sorry - needed to be more prescriptive.
I have the old SKU from the cluster - its 00109, that came from the ECU off VKC. I have a replacement cluster which i need to find the SKC from and this is where the problem is occurring. Need to read the cluster eeprom, which is a Marinelli unit. Cheers Title: Re: TT Immo - cannot read full eeprom Post by: elektronik13 on March 24, 2021, 03:33:26 PM Sorry - needed to be more prescriptive. try reading as directI have the old SKU from the cluster - its 00109, that came from the ECU off VKC. I have a replacement cluster which i need to find the SKC from and this is where the problem is occurring. Need to read the cluster eeprom, which is a Marinelli unit. Cheers Title: Re: TT Immo - cannot read full eeprom Post by: Byront on March 24, 2021, 04:45:14 PM Can't it crashed VKC everytime just after connection.
Title: Re: TT Immo - cannot read full eeprom Post by: elektronik13 on March 25, 2021, 01:28:54 AM Can't it crashed VKC everytime just after connection. if direct does not work, reading the eeprom processor with the programmer remains |